Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2907916
PHOENIX CONTACTNot available

PLT-SEC-T3-24-FM-UT - Type 3 surge protection device

Type3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 24VAC/DC
Product Code: 2907916
Partner cod.: 2907916
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
Product propertiesIEC power supply system: TN-S
Type: DIN rail module, two-section, divisible
Product type: Device protection
Product family: SEC Family
Number of positions: 2
Surge protection fault message: Optical, remote indicator contact
Insulation characteristics
Overvoltage category: III
Pollution degree: 2
IEC test classification: III
T3
EN type: T3
Number of ports: One
Electrical propertiesIndicator/remote signaling
Connection name: Remote fault indicator contact
Switching function: Changeover contact
Operating voltage: 250 VAC
125 VDC (200 mA DC)
Operating current: 0.5 A AC
0.5 ADC (75VDC)
Connection dataConnection method: Screw connection
Screw thread: M3
Tightening torque: 0.5 Nm
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section rigid: 0.2 mm² ... 4 mm²
Conductor cross section AWG: 24 ... 12
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/6c0aeca69c09d34d813d8a1d38285f5c/-S204x204-FJPG
Width: 17.7 mm
Height: 93.4 mm
Depth: 74.5 mm (incl. DIN rail 7.5mm)
Horizontal pitch: 1 Div.
Material specificationsFlammability rating according to UL 94: V-0
CTI value of material: 600
Insulating material: PA 6.6-FR 20 % GF
PA 6.6-FR
Housing material: PA 6.6-FR 20% GF
PA 6.6-FR
Protective circuitMode of protection: L-N
L-PE
N-PE
Direction of action: 1L-N & N-PE
Nominal voltage UN: 24VAC(TN-S)
Nominal frequency fN: 50 Hz (60Hz)
Maximum continuous voltage UC: 34 VAC
Rated load current IL: 26 A (at 30°C)
Residual current IPE: ≤ 5 µA
Standby power consumption PC: ≤ 2.7 mVA (at UREF)
≤ 4.8 mVA (at UC)
Reference test voltage UREF: 27 VAC
Nominal discharge current In (8/20) µs: 1 kA
Combination wave UOC: 2 kV
Voltage protection level Up (L-N): ≤ 0.2 kV
Voltage protection level Up (L-PE): ≤ 0.6 kV
Voltage protection level Up (N-PE): ≤ 0.6 kV
TOV behavior at UT (L-N): 50 VAC (120min / withstand mode)
TOV behavior at UT (L-PE): 50 VAC (120min / withstand mode)
Response time tA (L-N): ≤ 25 ns
Response time tA (L-PE): ≤ 100 ns
Response time tA (N-PE): ≤ 100 ns
Short-circuit current rating ISCCR: 10 kA AC
Max. backup fuse with branch wiring: 32 A (gG / B / C)
Additional technical data
Short-circuit current rating ISCCR: 0.25 kA DC (Without additional backup fuse in the DC branch wiring)
5 kA DC (for 20 A gG / B backup fuse)
Maximum discharge current Imax (8/20) µs: 4 kA
Nominal discharge current In (8/20) µs: 3 kA
Residual voltage Ures (L-N): ≤ 0.16 kV (at 0.5kA)
≤ 0.2 kV (at 1 kA)
Residual voltage Ures (L-PE): ≤ 0.35 kV (at 0.5kA)
≤ 0.4 kV (at 1 kA)
Residual voltage Ures (N-PE): ≤ 0.35 kV (at 0.5kA)
≤ 0.4 kV (at 1 kA)
Maximum continuous voltage UC: 44 VDC
Mode of protection: (DC+) - (DC-)
(DC+/DC-) - PE
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP20
Ambient temperature (operation): -40°C ... 80°C
Ambient temperature (storage/transport): -40°C ... 80°C
Altitude: ≤ 2000 m (operating voltage remote contact ≤ 250 V)
≤ 6000 m (operating voltage remote contact ≤ 150 V)
Permissible humidity (operation): 5 % ... 95 %
Shock (operation): 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation): 5g (5 ... 500 Hz / 2.5 h / X, Y, Z)
ApprovalsUL specifications
Maximum continuous operating voltage MCOV: 34 VAC
34 VDC
Nominal discharge current In: 1 kA
Mode of protection: L-N
L-G
N-G
(DC+) - (DC-)
(DC+) - G
(DC-) - G
Nominal voltage: 34 VDC
Rated load current IL: 20 A
Power distribution system: Single phase
DC
Nominal frequency: 50/60 Hz
Measured limiting voltage MLV (L-N): 200 V
Measured limiting voltage MLV (L-G): 510 V
Measured limiting voltage MLV (N-G): 510 V
SPD Type: 4CA
UL indicator/remote signaling
Operating voltage: 250 VAC (0.5A)
DC operating voltage: 12 VDC (4A)
24 VDC (2A)
48 VDC (1A)
UL connection data
Tightening torque: 4.4 lbf-in.
Conductor cross section AWG: 16 ... 12
Standards and regulationsStandards/specifications: IEC 61643-11
Note: 2011
EN 61643-11
Standards/specifications: EN61643-11
Note: 2012
MountingMounting type: DIN rail: 35 mm
Technical Specs
ECLASSECLASS-11.0: 27130806
ECLASS-13.0: 27171203
ETIMETIM 9.0: EC000942
UNSPSCUNSPSC 21.0: 39121600
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00200.pdf

Approvals_00203.pdf

Approvals_01766.pdf

Approvals_01867.pdf

Flyer_00001.pdf

Flyer_00002.pdf

Flyer_00003.pdf

Manufacturer_declaration_00814.pdf

Manufacturer_declaration_01305.pdf

Manufacturer_declaration_02094.pdf

Package_slip_00344.pdf

Product_information_00033.pdf

Product_information_00999.pdf

Product_information_01023.pdf

Technical_drawing_40542.pdf