2908664 PHOENIX CONTACT - Technology Bsa

MACX MCR-TS-I-OLP-SP - Temperature measuring transducer

Output loop-powered temperature transducer for transmitting up to 2sensor signals from RTD and TC sensors, as well as from resistance and voltage sensors via 4mA...20mA. HART, Standard configuration, Safety Integrity Level (SIL, IEC61508): 2, Systematic Capability: 3, Push-in connection

Product Code: 2908664

Partner cod.: 2908664

PHOENIX CONTACT

Product properties	Product type: Temperature transmitter Product family: MACX Analog No. of channels: 2 Type: Signal conditioners with SIL functional safety Configuration: Software HART Insulation characteristics Overvoltage category: II Pollution degree: 2
Electrical properties	No. of channels: 2 Step response (0Ã¢99%): 0.8 s (TC) Electrical isolation Input/output Test voltage: 2 kV AC (50Hz, 60s) Supply Supply voltage range: loop-powered, no external supply necessary 12 VDC ... 42 VDC (Standard) 12 VDC ... 32 VDC (SIL active)
Input data	Signal Input signal: Temperature Measurement Number of inputs: 2 Input voltage range: -20 mV ... 100 mV (Minimum measuring span: 5mV) Sensor types (RTD) that can be used: Pt, Ni, Cu sensors: 2, 3, 4-wire Sensor types that can be used (TC): A, B, C, D, E, J, K, L, N, R, S, T, U Temperature measuring range: -250°C ... 2500°C (Range depending on the sensor type) -200°C ... 850°C (Pt 100) > 10 K (RTD) > 50 K (TC) Linear resistance measuring range: 10 Ã© ... 2000 Ã© (Minimum measuring span: 10Ã©)
Output data	Signal: Current Configurable/programmable: no Current output signal: 4 mA ... 20 mA 20 mA ... 4 mA Max. current output signal: 23 mA Load: (U_L - 11V) / 0,023A HART coding: FSK ± 0.5mA HART version: 7 Transmission speed: 1200 Baud Mains frequency filter: 50/60 Hz Communication resistance: Ã¢¥ 250 Ã© Switch-on delay: Ã¯» 10 s (HART) Ã¯» 28 s (Measured value)
Connection data	Connection method: Push-in connection Stripping length: 8 mm Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16
Ex data	Ex installation (EPL): Gc Div.2
Interfaces	Data communication (bypass) Protocols supported: HART
Signaling	Status display: LED red
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/d4485e18fd60154ba93005f91a55c68d/-S204x204-FJPG Width: 12.5 mm Height: 116 mm Depth: 113.7 mm Depth NS35/7,5: 114.5 mm (Snapped onto DIN rail NS35/7,5 in accordance with EN60715)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 85°C -40°C ... 70°C (SIL active) Ambient temperature (storage/transport): -40°C ... 100°C Altitude: Ã¢¤ 4000 m (Above sea level) Climatic class: B2 Permissible humidity (operation): 5 % ... 95 % (non-condensing)
Approvals	CE Certificate: CE-compliant ATEX Identification: Ã¯ II 3G Ex nA IIC T6...T4 Gc UL, USA/Canada Identification: UL61010 Recognized FM Identification: NI, Class I, Div. 2, Groups A, B, C, D CSA Identification: NI / Class I / Div. 2 / ABCD T6/T5/T4 Shipbuilding approval Certificate: DNV GL TAA00002GX Safety Integrity Level (SIL, IEC 61508) Identification: 2 Systematic Capability Identification: 3 DNV GL data Temperature: D Humidity: B Vibration: A EMC: B Enclosure: A
Mounting	Mounting type: DIN rail mounting