Industrial Automation
MACX MCR-SL-RPSSI-2I - Repeater power supply
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product type: Repeater power supplies Product family: MACX Analog No. of channels: 1 Type: Signal conditioners with SIL and PL Functional Safety |
Electrical properties | No. of channels: 1 Electrical isolation: 3-way isolation Electrical isolation between input and output: yes Maximum power dissipation for nominal condition: 1.45 W (24VDC / 20mA) Signal transmission behavior: In=Out Step response (10-90%): 1.3 ms (for jump 4mA...20mA, typical) Maximum temperature coefficient: < 0.01 %/K Maximum transmission error: < 0.1 % (of final value) Transmission error, typical: < 0.05 % (of final value) Electrical isolationâ Overvoltage category: II Pollution degree: 2 Electrical isolation Input/output/power supply IEC/EN61010-1 Standards/regulations: IEC/EN61010-1 Rated insulation voltage: 300 Vrms Test voltage: 2.5 kV AC (50Hz, 60s) Insulation: Safe isolation Electrical isolation Output 1/output 2 Test voltage: 1.5 kV AC (50Hz, 60s) Supply Designation: Repeater power supply operation Nominal supply voltage: 24 VDC -20%...+25% Supply voltage range: 19.2 VDC ... 30 VDC Max. current consumption: < 75 mA (24VDC / 20mA) Power dissipation: < 1.45 W (24VDC / 20mA) Power consumption: ⤠1.8 W Supplyâ Designation: Signal conditioner operation Nominal supply voltage: 24 VDC -20%...+25% Supply voltage range: 19.2 VDC ... 30 VDC Max. current consumption: < 46 mA (24VDC / 20mA) Power dissipation: < 1.2 W (24VDC / 20mA) |
Input data | Signal: Repeater power supply operation Description of the input: Repeater power supply operation Number of inputs: 1 Current input signal: 4 mA ... 20 mA Transmitter supply voltage: > 21.5 V (20mA) > 21 V (23mA) Underload/overload signal range: 0 mA ... 24 mA (Extended transmission range for diagnostics) Signal: Signal conditioner operation Description of the input: Signal conditioner operation Current input signal: 0 mA ... 20 mA 4 mA ... 20 mA Voltage drop: < 3.9 V (in input isolating amplifier operation) Underload/overload signal range: 0 mA ... 24 mA (Extended transmission range for diagnostics) |
Output data | Signal: Repeater power supply operation Output description: Repeater power supply operation Number of outputs: 2 Current output signal: 4 mA ... 20 mA (active) 0 mA ... 20 mA Load/output load current output: < 450 é (20mA) < 380 é (23mA) Output ripple: < 20 mVrms Output behavior in the event of an error: 0 mA (Cable break in the input) ⥠23 mA (Cable short-circuit in the input) Underload/overload signal range: 0 mA ... 24 mA (Extended transmission range for diagnostics) Signal: Signal conditioner operation Output description: Signal conditioner operation Current output signal: 0 mA ... 20 mA (active) 4 mA ... 20 mA (active) Load/output load current output: < 450 é (20mA) < 380 é (23mA) Output ripple: < 20 mVrms Output behavior in the event of an error: 0 mA (Cable break in the input) 0 mA (Cable short-circuit in the input) Underload/overload signal range: 0 mA ... 24 mA (Extended transmission range for diagnostics) |
Connection data | Connection method: Screw connection Stripping length: 7 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 Tightening torque: 0.5 Nm ... 0.6 Nm Test socket Max. diameter: 2.3 mm |
Ex data | Ex installation (EPL): Gc Div.2 |
Interfaces | Data communication (bypass) HART function: Yes Protocols supported: HART-transparent |
Signaling | Status display: Green LED (supply voltage) |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/3edd36290ae8094db8e0add7aa964a6f/-S204x204-FJPG Width: 12.5 mm Height: 112.5 mm Depth: 113.7 mm Depth NS35/7,5: 114.5 mm (Snapped onto DIN rail NS35/7,5 in accordance with EN60715) |
Material specifications | Flammability rating according to UL 94: V0 (Housing) Housing material: PA 6.6-FR |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 (not assessed by UL) Ambient temperature (operation): -40°C ... 60°C (Any mounting position) -40°C ... 70°C (Derating) Ambient temperature (storage/transport): -40°C ... 80°C Permissible humidity (operation): 10 % ... 95 % (non-condensing) Altitude range (⤠2000 m) Altitude: ⤠2000 m (The technical data refers to altitudes â¤2000m above mean sea level. For altitudes >2000m above mean sea level, refer to the data sheet.) Ambient temperature (operation): -40°C ... 60°C -40°C ... 70°C (Derating) Rated insulation voltage: 375 VPP (Power supply, input / output) Altitude range (⤠3000 m) Height range: > 2000 m ... 3000 m Ambient temperature (operation): -40°C ... 54°C -40°C ... 63°C (Derating) Rated insulation voltage: 190 VAC (Power supply, input / output) 110 VDC (Power supply, input / output) Altitude range (⤠4000 m) Height range: > 3000 m ... 4000 m Ambient temperature (operation): -40°C ... 48°C -40°C ... 56°C (Derating) Rated insulation voltage: 60 V AC/DC (Power supply, input / output) Altitude range (⤠5000 m) Height range: > 4000 m ... 5000 m Ambient temperature (operation): -40°C ... 42°C -40°C ... 49°C (Derating) Rated insulation voltage: 60 V AC/DC (Power supply, input / output) |
Approvals | CE Certificate: CE-compliant Note: and EN61326-1 ATEX Identification: ï II 3 G Ex ec IIC T4 Gc X Certificate: PxCCIF11ATEX2924825 UKCAEx(UKEX) Identification: ï II 3 G Ex nA IIC T4 Gc Certificate: PxCIF21UKEX2924825X IECEx Identification: Ex ec IIC T4 Gc Certificate: IECEx BVS 10.0097X CCC/China-Ex Identification: Ex ec IIC T4 Gc Certificate: 2022122316115971 UL, USA/Canada Identification: UL508 Listed UL 61010 Listed Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, Groups IIC, IIB, IIA T4 UL, USA/Canadaâ Identification: UL 61010 Listed Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, Group IIC T4 Shipbuilding approval Certificate: DNV GL TAA000020C Safety Integrity Level (SIL, IEC 61508) Identification: 2 Performance Level (ISO13849) Identification: d DNV GL data Temperature: B Humidity: B Vibration: A EMC: A Enclosure: Required protection according to the Rules shall be provided upon installation on board |
EMC data | Noise immunity: EN 61000-6-2 Note: When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility: Conformance with EMC directive Noise emission: EN 61000-6-4 Electromagnetic HF field Designation: Electromagnetic RF field Standards/regulations: EN61000-4-3 Typical deviation from the measuring range final value: 3 % Fast transients (burst) Designation: Fast transients (burst) Standards/regulations: EN61000-4-4 Typical deviation from the measuring range final value: 3 % Conducted interference Designation: Conducted interferences Standards/regulations: EN61000-4-6 Typical deviation from the measuring range final value: 3 % |
Standards and regulations | Electrical isolation: 3-way isolation |
Mounting | Mounting type: DIN rail mounting |
ECLASS | ECLASS-11.0: 27210120 ECLASS-12.0: 27210120 ECLASS-13.0: 27210120 |
ETIM | ETIM 9.0: EC002653 |
UNSPSC | UNSPSC 21.0: 39121000 |
Description other products