| Product properties | Product type: Repeater power supplies
Product family: MACX Analog
No. of channels: 1
Type: Signal conditioners with SIL and PL Functional Safety
|
| Electrical properties | No. of channels: 1
Electrical isolation: 3-way isolation
Electrical isolation between input and output: yes
Maximum power dissipation for nominal condition: 1.45 W (24VDC / 20mA)
Signal transmission behavior: In=Out
Step response (10-90%): 1.3 ms (for jump 4mA...20mA, typical)
Maximum temperature coefficient: < 0.01 %/K
Maximum transmission error: < 0.1 % (of final value)
Transmission error, typical: < 0.05 % (of final value)
Electrical isolation​
Overvoltage category: II
Pollution degree: 2
Electrical isolation Input/output/power supply IEC/EN61010-1
Standards/regulations: IEC/EN61010-1
Rated insulation voltage: 300 Vrms
Test voltage: 2.5 kV AC (50Hz, 60s)
Insulation: Safe isolation
Electrical isolation Output 1/output 2
Test voltage: 1.5 kV AC (50Hz, 60s)
Supply
Designation: Repeater power supply operation
Nominal supply voltage: 24 VDC -20%...+25%
Supply voltage range: 19.2 VDC ... 30 VDC
Max. current consumption: < 75 mA (24VDC / 20mA)
Power dissipation: < 1.45 W (24VDC / 20mA)
Power consumption: ≤ 1.8 W
Supply​
Designation: Signal conditioner operation
Nominal supply voltage: 24 VDC -20%...+25%
Supply voltage range: 19.2 VDC ... 30 VDC
Max. current consumption: < 46 mA (24VDC / 20mA)
Power dissipation: < 1.2 W (24VDC / 20mA)
|
| Input data | Signal: Repeater power supply operation
Description of the input: Repeater power supply operation
Number of inputs: 1
Current input signal: 4 mA ... 20 mA
Transmitter supply voltage: > 21.5 V (20mA)
> 21 V (23mA)
Underload/overload signal range: 0 mA ... 24 mA (Extended transmission range for diagnostics)
Signal: Signal conditioner operation
Description of the input: Signal conditioner operation
Current input signal: 0 mA ... 20 mA
4 mA ... 20 mA
Voltage drop: < 3.9 V (in input isolating amplifier operation)
Underload/overload signal range: 0 mA ... 24 mA (Extended transmission range for diagnostics)
|
| Output data | Signal: Repeater power supply operation
Output description: Repeater power supply operation
Number of outputs: 2
Current output signal: 4 mA ... 20 mA (active)
0 mA ... 20 mA
Load/output load current output: < 450 Ω (20mA)
< 380 Ω (23mA)
Output ripple: < 20 mVrms
Output behavior in the event of an error: 0 mA (Cable break in the input)
≥ 23 mA (Cable short-circuit in the input)
Underload/overload signal range: 0 mA ... 24 mA (Extended transmission range for diagnostics)
Signal: Signal conditioner operation
Output description: Signal conditioner operation
Current output signal: 0 mA ... 20 mA (active)
4 mA ... 20 mA (active)
Load/output load current output: < 450 Ω (20mA)
< 380 Ω (23mA)
Output ripple: < 20 mVrms
Output behavior in the event of an error: 0 mA (Cable break in the input)
0 mA (Cable short-circuit in the input)
Underload/overload signal range: 0 mA ... 24 mA (Extended transmission range for diagnostics)
|
| Connection data | Connection method: Push-in connection
Stripping length: 10 mm
Conductor cross section rigid: 0.2 mm² ... 2.5 mm²
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section flexible (2 conductors with same cross section): 0.25 mm² ... 0.34 mm² (TWIN ferrule without plastic sleeve)
0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve)
Conductor cross section AWG: 24 ... 14
24 ... 22 (TWIN ferrule without plastic sleeve)
20 ... 16 (TWIN ferrule with plastic sleeve)
|
| Ex data | Ex installation (EPL): Gc
Div.2
|
| Interfaces | Data communication (bypass)
HART function: Yes
Protocols supported: HART-transparent
|
| Signaling | Status display: Green LED (supply voltage)
|
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/3edd36290ae8094db8e0add7aa964a6f/-S204x204-FJPG
Width: 12.5 mm
Height: 107.9 mm
Depth: 113.7 mm
Depth NS35/7,5: 114.5 mm (Snapped onto DIN rail NS35/7,5 in accordance with EN60715)
|
| Material specifications | Flammability rating according to UL 94: V0 (Housing)
Housing material: PA 6.6-FR
|
| Environmental and real-life conditions | Ambient conditions
Degree of protection: IP20 (not assessed by UL)
Ambient temperature (operation): -40°C ... 60°C (Any mounting position)
-40°C ... 70°C (Derating)
Ambient temperature (storage/transport): -40°C ... 80°C
Permissible humidity (operation): 10 % ... 95 % (non-condensing)
Altitude range (≤ 2000 m)
Altitude: ≤ 2000 m (The technical data refers to altitudes ≤2000m above mean sea level. For altitudes >2000m above mean sea level, refer to the data sheet.)
Ambient temperature (operation): -40°C ... 60°C
-40°C ... 70°C (Derating)
Rated insulation voltage: 375 VPP (Power supply, input / output)
Altitude range (≤ 3000 m)
Height range: > 2000 m ... 3000 m
Ambient temperature (operation): -40°C ... 54°C
-40°C ... 63°C (Derating)
Rated insulation voltage: 190 VAC (Power supply, input / output)
110 VDC (Power supply, input / output)
Altitude range (≤ 4000 m)
Height range: > 3000 m ... 4000 m
Ambient temperature (operation): -40°C ... 48°C
-40°C ... 56°C (Derating)
Rated insulation voltage: 60 V AC/DC (Power supply, input / output)
Altitude range (≤ 5000 m)
Height range: > 4000 m ... 5000 m
Ambient temperature (operation): -40°C ... 42°C
-40°C ... 49°C (Derating)
Rated insulation voltage: 60 V AC/DC (Power supply, input / output)
|
| Approvals | CE
Certificate: CE-compliant
Note: and EN61326-1
ATEX
Identification: ï˜ II 3 G Ex ec IIC T4 Gc X
Certificate: PxCCIF11ATEX2924825
UKCAEx(UKEX)
Identification: ï˜ II 3 G Ex nA IIC T4 Gc
Certificate: PxCIF21UKEX2924825X
IECEx
Identification: Ex ec IIC T4 Gc
Certificate: IECEx BVS 10.0097X
CCC/China-Ex
Identification: Ex ec IIC T4 Gc
Certificate: 2022122316115971
UL, USA/Canada
Identification: UL508 Listed
UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Groups IIC, IIB, IIA T4
UL, USA/Canada​
Identification: UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Zone 2, Group IIC T4
Shipbuilding approval
Certificate: DNV GL TAA000020C
Safety Integrity Level (SIL, IEC 61508)
Identification: 2
Performance Level (ISO13849)
Identification: d
DNV GL data
Temperature: B
Humidity: B
Vibration: A
EMC: A
Enclosure: Required protection according to the Rules shall be provided upon installation on board
|
| EMC data | Noise immunity: EN 61000-6-2
Note: When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility: Conformance with EMC directive
Noise emission: EN 61000-6-4
Electromagnetic HF field
Designation: Electromagnetic RF field
Standards/regulations: EN61000-4-3
Typical deviation from the measuring range final value: 3 %
Fast transients (burst)
Designation: Fast transients (burst)
Standards/regulations: EN61000-4-4
Typical deviation from the measuring range final value: 3 %
Conducted interference
Designation: Conducted interferences
Standards/regulations: EN61000-4-6
Typical deviation from the measuring range final value: 3 %
|
| Standards and regulations | Electrical isolation: 3-way isolation
|
| Mounting | Mounting type: DIN rail mounting
|
Not available 
