Industrial Automation
Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
Product properties | Product type: Relay Module Product family: EMG Application: high inrush currents Operating mode: 100% operating factor Mechanical service life: 3x 107 cycles Insulation characteristics Insulation: safe isolation Insulation characteristicsâ Insulation: safe isolation Overvoltage category: III Pollution degree: 2 |
Electrical properties | Maximum power dissipation for nominal condition: 0.55 W Test voltage (Winding/contact): 4 kV AC (50Hz, 1min., winding/contact) |
Input data | Coil side Nominal input voltage UN: 24 VDC Input voltage range: 21.6 VDC ... 26.4 VDC (20°C) Drive and function: monostable Drive (polarity): polarized Typical input current at UN: 23 mA Typical response time: 9 ms Typical release time: 10 ms Protective circuit: Freewheeling diode; Freewheeling diode Reverse polarity protection; Polarity protection diode Operating voltage display: Automatic: Yellow LED, Manual: Red LED |
Output data | Switching Contact switching type: 1 N/O contact Type of switch contact: Single contact Contact material: AgSnO Maximum switching voltage: 250 V AC/DC Limiting continuous current: 10 A Maximum inrush current: 120 A (20ms) Interrupting rating (ohmic load) max.: 240 W (at 24 V DC) 120 W (at 48 V DC) 85 W (at 60 V DC) 70 W (at 110 V DC) 90 W (at 220 V DC) 100 W (for 250 V DC) 2500 VA (for 250 V AC) Interrupting rating (lamp load) max.: on request |
Connection data | Coil side Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 4 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 Contact side Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 4 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 |
Dimensions | Width: 17.5 mm Height: 75 mm Depth: 62.5 mm |
Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -20°C ... 50°C Ambient temperature (storage/transport): -20°C ... 70°C |
Standards and regulations | Standards/regulations: IEC 60664 EN50178 |
Mounting | Mounting type: DIN rail mounting Mounting position: any |
ECLASS | ECLASS-11.0: 27371601 ECLASS-12.0: 27371601 ECLASS-13.0: 27371601 |
ETIM | ETIM 9.0: EC001437 |
UNSPSC | UNSPSC 21.0: 39122300 |
Description other products