Industrial Automation
Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
Product properties | Product type: Relay Module Product family: EMG Application: Universal Operating mode: 100% operating factor Mechanical service life: approx. 107 cycles Insulation characteristics Insulation: Safe isolation, reinforced insulation Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Safe isolation, reinforced insulation Overvoltage category: III Pollution degree: 2 Insulation characteristicsâ Overvoltage category: III Pollution degree: 2 |
Electrical properties | Maximum power dissipation for nominal condition: 0.41 W Test voltage (Winding/contact): 4 kVrms (50Hz, 1min., winding/contact) Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 VAC Rated surge voltage: 4 kV |
Input data | Coil side Nominal input voltage UN: 48 VDC Input voltage range: 38.4 VDC ... 52.8 VDC (20°C) Drive and function: bistable Drive (polarity): polarized Typical input current at UN: typ. 8.5 mA Typical response time: 5 ms Typical release time: 5 ms Pulse time range: 30 ms ... 5 s Coil voltage: 24 VDC Protective circuit: Freewheeling diode; Freewheeling diode Reverse polarity protection; Polarity protection diode |
Output data | Switching Contact switching type: 1changeover contact Type of switch contact: Single contact Contact material: AgSnO Maximum switching voltage: 250 V AC/DC Minimum switching voltage: 5 V (at 100 mA) 24 V (At 1 mA) Limiting continuous current: 6 A Maximum inrush current: 8 A Min. switching current: 1 mA (at 24V) 100 mA (At 5 V) Interrupting rating (ohmic load) max.: 144 W (at 24 V DC) 43 W (at 48 V DC) 42 W (at 60 V DC) 55 W (at 110 V DC) 100 W (at 220 V DC) 1500 VA (for 250 V AC) Switching: when the gold layer is destroyed Maximum switching voltage: 250 V AC/DC Limiting continuous current: 6 A Maximum inrush current: 8 A Interrupting rating (ohmic load) max.: 140 W (at 24 V DC) 40 W (at 48 V DC) 35 W (at 60 V DC) 30 W (at 110 V DC) 55 W (at 220 V DC) 1500 VA (for 250 V AC) |
Connection data | Coil side Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 4 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 Contact side Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 4 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 |
Dimensions | Width: 17.5 mm Height: 75 mm Depth: 62.5 mm |
Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -40°C ... 50°C Ambient temperature (storage/transport): -40°C ... 70°C |
Standards and regulations | Air clearances and creepage distances between the power circuits Standards/regulations: DINEN50178 |
Mounting | Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any |
ECLASS | ECLASS-11.0: 27371601 ECLASS-12.0: 27371601 ECLASS-13.0: 27371601 |
ETIM | ETIM 9.0: EC001437 |
UNSPSC | UNSPSC 21.0: 39122300 |
Description other products