Industrial Automation
Notes | General: Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. |
Product properties | Product type: Solid-state relay module Product family: DEK Application: 100 kHz input optocoupler Operating mode: 100% operating factor Insulation characteristics Insulation: Basic insulation Insulation characteristicsâ Insulation: Basic insulation Overvoltage category: II Pollution degree: 2 |
Electrical properties | Test voltage (Input/output): 2.5 kV AC (Input/output) |
Input data | Nominal input voltage UN: 5 VDC Input voltage range in reference to UN: 0.5 ... 1.2 Input voltage range: 2.5 VDC ... 6 VDC Switching threshold "0" signal in reference to UN: ⤠0.3 Switching threshold "1" signal in reference to UN: ⥠0.5 Typical input current at UN: 8 mA Typical response time: 1 µs Typical turn-off time: 2 µs Operating voltage display: Yellow LED Protective circuit: Reverse polarity protection; Polarity protection diode Surge protection Transmission frequency: 100 kHz |
Output data | Contact switching type: 1 N/O contact Design of digital output: electronic Output voltage range: 4 VDC ... 18 VDC Limiting continuous current: 50 mA Quiescent current: 8.5 mA Voltage drop at max. limiting continuous current: ⤠1.2 VDC Output circuit: 3-conductor push-pull, ground referenced Protective circuit: Surge protection; Suppressor diode |
Connection data | Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 14 Tightening torque: 0.5 Nm |
Dimensions | Width: 6.2 mm Height: 80 mm Depth: 56 mm |
Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -20°C ... 60°C Ambient temperature (storage/transport): -20°C ... 70°C |
Standards and regulations | Standards/regulations: IEC 60947-5-1 |
Mounting | Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any |
Description other products