Industrial Automation
Product properties | Product type: Single solid-state relay Operating mode: 100% operating factor Insulation characteristics Insulation: Basic insulation Insulation characteristics: Standards/regulations Insulation: Basic insulation Overvoltage category: III Pollution degree: 2 |
Electrical properties | Maximum power dissipation for nominal condition: 0.05 W Test voltage (Input/output): 2.5 kV (50Hz, 1min., input/output) |
Input data | Nominal input voltage UN: 5 VDC Input voltage range in reference to UN: 0.8 ... 1.2 Input voltage range: 4 VDC ... 6 VDC Switching threshold "0" signal, voltage: ⤠0.8 V Switching threshold "1" signal voltage: ⥠2.5 V Typical input current at UN: 9 mA Typical response time: 20 µs (at UN) Typical turn-off time: 300 µs (at UN) Transmission frequency: 300 Hz |
Output data | Contact switching type: 1 N/O contact Design of digital output: electronic Output voltage range: 3 VDC ... 33 VDC Limiting continuous current: 3 A (see derating curve) Maximum inrush current: 15 A (10 ms) Voltage drop at max. limiting continuous current: ⤠150 mV Output circuit: 2-conductor, floating Protective circuit: Reverse polarity protection Surge protection |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/260a0c446066a14fa55788300101ccb8/-S204x204-FJPG Width: 5 mm Height: 28 mm Depth: 15 mm |
Environmental and real-life conditions | Ambient conditions Degree of protection: RT III Ambient temperature (operation): -25°C ... 60°C Ambient temperature (storage/transport): -25°C ... 70°C |
Approvals | Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group EN60068-2-60 |
Standards and regulations | Standards/regulations Standards/regulations: IEC 60664 EN50178 |
Mounting | Assembly instructions: in rows with zero spacing Mounting position: any |
Description other products