Industrial Automation
Notes | General: In the end application, the applicable safety regulations for overload and short-circuit protection on the connected conductors must be considered. |
Product properties | Product type: Potential distributor Number of connections: 5 Number of rows: 1 Potentials: 1 Insulation characteristics Overvoltage category: III Degree of pollution: 2 |
Electrical properties | Rated surge voltage: 8 kV Maximum power dissipation for nominal condition: 2.43 W |
Connection data | Number of connections per level: 5 Screw thread: M6 Tightening torque: 3.2 ... 3.7 Nm Stripping length: 18 mm ... 20 mm Internal cylindrical gage: B9 Connection in acc. with standard: IEC 60947-7-1 Conductor cross section rigid: 1.5 mm² ... 50 mm² 0.5 mm² ... 10 mm² Cross section AWG: 14 ... 2 (converted acc. to IEC) 20 ... 6 (converted acc. to IEC) Conductor cross section flexible: 1.5 mm² ... 35 mm² 0.5 mm² ... 10 mm² Conductor cross section, flexible [AWG]: 14 ... 2 (converted acc. to IEC) 20 ... 6 (converted acc. to IEC) Conductor cross-section flexible (ferrule without plastic sleeve): 1.5 mm² ... 35 mm² 0.5 mm² ... 10 mm² Flexible conductor cross section (ferrule with plastic sleeve): 1.5 mm² ... 35 mm² 0.5 mm² ... 10 mm² Conductor cross-section flexible (2 conductors with the same cross-section, with TWIN ferrule and plastic sleeve): 1.5 mm² ... 10 mm² 1.5 mm² ... 4 mm² 2 conductors with same cross section, solid: 1.5 mm² ... 16 mm² 2 conductors with the same cross-section AWG rigid: 16 ... 6 (converted acc. to IEC) 2 conductors with same cross section, flexible: 1.5 mm² ... 10 mm² 2 conductors with the same cross-section AWG flexible: 16 ... 8 (converted acc. to IEC) 2 conductors with same cross section, flexible, with ferrule without plastic sleeve: 1.5 mm² ... 10 mm² Nominal current: 101 A 57 A Maximum load current: 101 A (The maximum load current must not be exceeded by the total current of all connected conductors.) 57 A Nominal voltage: 1000 V Nominal cross section: 35 mm² 10 mm² Connection cross sections directly pluggable Conductor cross section rigid: 1 mm² ... 16 mm² Conductor cross section, rigid [AWG]: 16 ... 6 (converted acc. to IEC) Conductor cross section flexible: 4 mm² ... 10 mm² |
Dimensions | Width: 19.4 mm Height: 79.9 mm Depth on NS35/7,5: 50.3 mm Depth on NS35/15: 57.8 mm |
Material specifications | Color: gray Flammability rating according to UL 94: V0 Insulating material group: I Insulating material: PA Static insulating material application in cold: -60°C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)): 130°C Relative insulation material temperature index (Elec., UL 746 B): 130°C Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26: HL 1 - HL 3 Calorimetric heat release NFPA 130 (ASTM E 1354): 28 MJ/kg Surface flammability NFPA 130 (ASTM E 162): passed Specific optical density of smoke NFPA 130 (ASTM E 662): passed Smoke gas toxicity NFPA 130 (SMP 800C): passed |
Electrical tests | Surge voltage test Test voltage setpoint: 9.8 kV Result: Test passed Temperature-rise test Requirement temperature-rise test: Increase in temperature â¤45K Result: Test passed Short-time withstand current 10 mm²: 1.2 kA Short-time withstand current 16 mm²: 1.92 kA Short-time withstand current 35 mm²: 4.2 kA Power-frequency withstand voltage Test voltage setpoint: 2.2 kV Result: Test passed |
Mechanical properties | Mechanical data Open side panel: No |
Mechanical tests | Mechanical strength Result: Test passed Attachment on the carrier DIN rail/fixing support: NS35 Test force setpoint: 5 N Result: Test passed Test for conductor damage and slackening Rotation speed: 10rpm Revolutions: 135 Conductor cross section/weight: 2.5 mm² / 0.7 kg 10 mm² / 2 kg 35 mm² / 6.8 kg Result: Test passed |
Environmental and real-life conditions | Aging Temperature cycles: 192 Result: Test passed Needle-flame test Time of exposure: 30 s Result: Test passed Oscillation/broadband noise Specification: DINEN50155 (VDE0115-200):2008-03 Spectrum: Service life test category2, bogie-mounted Frequency: f1 = 5 Hz to f2 = 250 Hz ASD level: 6.12 (m/s²)²/Hz Acceleration: 3.12g Test duration per axis: 5 h Test directions: X-, Y- and Z-axis Result: Test passed Shocks Specification: DINEN50155 (VDE0115-200):2008-03 Pulse shape: Half-sine Acceleration: 30g Shock duration: 18ms Number of shocks per direction: 3 Test directions: X-, Y- and Z-axis (pos. and neg.) Result: Test passed Ambient conditions Ambient temperature (storage/transport): -25°C ... 60°C (for a short time, not exceeding 24h, -60°C to +70°C) Ambient temperature (assembly): -5°C ... 70°C Ambient temperature (actuation): -5°C ... 70°C Permissible humidity (storage/transport): 30 % ... 70 % |
Standards and regulations | Connection in acc. with standard: IEC 60947-7-1 |
Mounting | Mounting type: NS 35/7,5 NS35/15 |
ECLASS | ECLASS-11.0: 27141120 ECLASS-13.0: 27250119 |
ETIM | ETIM 9.0: EC000897 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products