Not available

EtherNet/IP™ to PROFINET Gateway for dual subnets

Product Code: PLX32-EIP-PND

Partner cod.: PLX32-EIP-PND

PROSOFT TECHNOLOGY

Tecnichal data

Technical Specs

Description

Tecnichal data

Features and Benefits
ODVA Approved
PROFINET v2 certification with PROFINET Class A compliance
EtherNet/IP and PROFINET certifications ensure the device is compatible with their respective network
Field-tested with multiple PROFINET controllers from multiple vendors
Remotely view and diagnose EtherNet/IP and PROFINET networks
Embedded EDS AOP provided to allow for seamless integration to Studio 5000 and RSLogix 5000
Using EtherNet/IP I/O connections, no ladder programming is required
Multiple I/O connections to allow for increased throughput

Technical Specs

EtherNet/IP Specifications
Number of Class 3 Server Connections:5
Supported PLC Types:PLC2, PLC5, SLC, CLX, CMPLX, MICROLX
Supported Message Types:PCCC and CIP
Class 3 Client Connections:Connected - 2
Class 3 Client Connections:Unconnected - 1
Number of Class 1 I/O Connections:8
I/O connection sizes in/out:496/496 bytes
Max RPI time:5 ms per connection
CIP Services Supported:0x4C - CIP Data Table Read
CIP Services Supported:0x4D - CIP Data Table Write
Command List:Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count.
Command Sets:PLC-2/PLC-3/PLC5 Basic Command Set
Command Sets:PLC5 Binary Command Set
Command Sets:PLC5 ASCII Command Set
Command Sets:SLC500 Command Set
PROFINET Specifications
Driver Type:Class A Device
PROFINET I/O Data:1440 bytes IN, 1440 bytes OUT
Exchange Types:Cyclic Real-time (RT) and Acyclic Data
Environmental
Power Supply:24 VDC nominal
Power Supply:10 to 36 VDC allowed
Power Supply:Positive, Negative, GND Terminals
Current Load:24 VDC nominal @ 300 mA
Current Load:10 to 36 VDC @ 610 mA maximum
Operating Temperature:-25°C to 70°C (-13°F to 158°F)
Storage Temperature:-40°C to 80°C (-40°F to 176°F)
Relative Humidity:5% to 95% RH with no condensation
Shock:IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
Shock:IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operation)
Vibration:IEC 60068-2-6; 5G @ 10Hz to 150Hz
Dimensions (H x W x D):5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm
Ethernet Ports (2):10/100Mbit RJ45 Connector Electrical Isolation 1500 Vrms at 50 Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991
Ethernet Ports (2):Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration
Shipped With Each Unit:2.5 mm screwdriver
Shipped With Each Unit:ProSoft Solutions DVD
Shipped With Each Unit:J180 Power Connector
Shipped With Each Unit:5â straight-through Ethernet cable

Description

The EtherNet/IP to PROFINET device gateway offers bi-directional data transfers between a PROFINET Controller and EtherNet/IP networks. The PLX32-EIP-PND gateway is a stand-alone DIN-rail mounted unit that provides two Ethernet ports, with each port using a different subnet. The onboard SD Card slot (SD card optional) is used for storing configuration files that can be used for recovery, transferring the configuration to another gateway, or general configuration backup. The EtherNet/IP Driver uses Class 1 I/O connections or Class 3 Message instructions. The PROFINET driver operates as a PROFINET Class A device.