| With optical interface | Yes |
| Supporting protocol for TCP/IP | Yes |
| Supporting protocol for DeviceNet | No |
| Supporting protocol for other bus systems | No |
| Redundancy | No |
| IO link master | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for EtherNet/IP | Yes |
| Power dissipation | 6.2 W |
| Thermal dissipation | 21.28 BTU/h |
| Enclosure type rating | None (open-style) |
| Ethernet ports | 1 Ethernet fiber |
| CIP unconnected messages | 128 + 128 (backplane + Ethernet) |
| Current draw | 1.2 A @ 5.1V DC, 3 mA @ 24V DC |
| Ethernet cable | Multimode fiber, LC connector |
| Wiring category | 3 - on USB ports |
| Communication rate | 10/100 Mbps |
| Connections supported, max | TCP: 128, CIP: 256 (CIP connections can be used for all explicit or all implicit applications. for example, a 1756-ENBT module has a total of 128 CIP connections that can be used for any combination of connections.) |
| Isolation voltage | 30V (continuous), basic insulation type, USB to backplane type tested at 980V AC for 60 s |
| Supporting protocol for LON | No |
| Supporting protocol for ASI | No |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | No |
| Supporting protocol for KNX | No |
| Supporting protocol for Modbus | No |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for SUCONET | No |
| With potential separation | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for INTERBUS-Safety | No |
| Radio standard Bluetooth | No |
| Radio standard Wi-Fi 802.11 | No |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Radio standard UMTS | No |
| Slot width | 1 |
| ATEX temp code | T4 |
| Transmitter launch power, min | At beginning of Life (BOL): -19 dBm into 62.5/125 μm fiber, N/A = 0.275, -22.5 dBm into 50/125 μm fiber, N/A = 0.20, Allow -1 dB at End of Life (EOL) |
| Surrounding air temperature, max | 60 °C |
| Storage temperature | -40 °C |
| Emissions | CISPR 11: Class A |
| Vibration | 2 G @ 10...500 Hz |
| ESD immunity | 6 kV contact discharges, 8 kV air discharges |
| Relative humidity | 5...95% noncondensing |
| Shock | Operating: 30 G, Nonoperating: 30 G |
| Conducted RF immunity | 10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz |
| Operating temperature | 0 °C |
| Radiated RF immunity | 10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz |
| North American temperature code | T4A |
| IECEx temperature code | T4 |
| Module location | Chassis based, any slot |
Not available 
