Not available 
| Formation: | [4G1,50+(2x1,00)ST+(2xAWG22)SN]ST |
| installation type: | CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN |
| category: | HYBRID SERVOMOTOR |
| standard/approval: | CE/UL/CSA |
| shielding: | SHIELDED |
| group 1 // Power conductors / 4G1,50 | conductor material: Bare copper capillary diameter: - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) conductors number: 4 rated section: 1,50 mm² insulation material: Polyolefin colour: Black conductors marked U/L1, V/L2, W/L3 + Green/Yellow.. |
| group 2 // Motor brake / 2x1,00 | conductor material: Bare copper capillary diameter: - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) conductors number: 2 rated section: 1,00 mm² insulation material: Polyolefin colour: Black and White. intermediate taping make-up: Around the pair. material: Polyester tape shield on make-up: On the tape. material: Tinned copper shield shape: Braid shield coverage: >=85 drain wire: Not available taping on make-up: On the shield. material: Polyester tape |
| group 3 // Sick Bus pair / 2xAWG22 | conductor material: Bare copper capillary diameter: - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) conductors number: 2 rated section: AWG22 AWG insulation material: Polyolefin colour: Black and Blue. intermediate taping make-up: Around the pair. material: Non-woven tape shield on make-up: On the group (2xAWG22) material: Aluminized tape shield shape: Overlapped shielding tape coverage: 100 drain wire: Not available sheath make-up: On the group (2XAWG22). material: Polyolefin colour: Matte black - RAL 9005 |
| total assembly make-up | intermediate taping on make-up: Around the total assembly. material: Non-woven tape total shield on make-up: On the tape. material: Tinned copper shield shape: Overall shield coverage: >=85 % drain wire: Not available total taping on make-up: On the shield. material: Non-woven tape total sheath material: Polyurethane non-abrasive colour: Orange RAL 2003 DESINA ® diameter (mm): 13.2±0.35 Marking Metric marking: E83517 - cRUus - AWM STYLE 21209 90°C 1000V - AWM I/II A/B 90°C 1000V FT1 - TKFF390 ST [4G1,5+(2x1)H2+(2xAWG22)H2H]H2 - (Week/Year) - DESINA - UKCA CE electrical features working voltage: 1000 V test voltage: 3000 V rated capacity: (C/C)<=45±15&37; (2XAWG22); (C/C)<=90, (C/S)<=150 (4G1,5MMQ) (800&247;1000Hz) pF/m rated impedance: 110±10 (2XAWG22) (10MHz) ohm electrical resistance: (0,34 mmq)<=59,0;(1,0 mmq)<=19,5;(1,50 mmq)<=13,3 ohm/km insulation resistance: >=500 Mohm/km dynamic features minimum bending radius static installation: 5 times ø cable minimum bending radius dynamic installation: 7.5 times ø cable working temperature static installation: -40°C / +90°C working temperature dynamic installation: -40°C / +90°C travel speed: Up to 300 m/min acceleration/deceleration: Up to 50 m/sec² cable length inside chain: Up to 20 m chain length notes: (20mt Only horizontal)- (5mt Only vertical) guaranteed cycles: Up to 5 Mio torsions: +/- 30°/m notes: For application in dynamics installation with very low temperatures contact our technical department approvals and standards reference standards: 1581, UL 758(UL); C22.2 n° 210(CSA) ul csa approvals: RU E83517 AWM STYLE 21209 90°C 1000V CSA E83517 AWM I/II A/B 90°C 1000V fire behaviour: FT1(CSA); IEC 60332-1-2(EU); EN 50265-1-2(EU) HALOGEN FREE: IEC 60754-1(EU); EN 50267-2-1(EU) industrial oil resistance: 1581(UL); IEC 60811-404/507(EU); VDE 0472 p. 803 A/B; HD 22.10.S1 halogen free: SI compatibility wiring/manufacturer: SICK / Hiperface DSL Customs code Customs-tariff number: 85444999 Made in: IT |
Description other products