Catalogo Prodotti - Technology Bsa

140MP Motor Protection Circuit Breaker / Manual Motor Starter, Frame Size A, 5 kA, Adjustable Thermal/Fixed Magnetic MPCB, 0.40 - 0.63A

Bulletin 1492-SPM Supplemental Circuit Breaker, 2-Pole, Trip Curve C, 2A, No Neutral

Bulletin 1492-SPM Supplemental Circuit Breaker, 2-Pole, Trip Curve D, 2A, No Neutral

Bulletin 1492-SPM Supplemental Circuit Breaker, 2-Pole, Trip Curve C, 4A, No Neutral

Control Tower Stack Light, 115V AC Full Voltage, Green Steady LED (socket mount)

Control Tower Stack Light, 115V AC Full Voltage, Amber Steady LED (socket mount)

4983 Surge and Filter Protection, Din Rail Mount, UL 1449 , 277/480V AC, 40kA, 4 Pole Configuration

140M Accessories - C, RC, D, and F Frames, 3-Phase Comm. Link for 140M-C,-D, 54mm Spacing, 2 Starters

199-MSM Surge Supressor, Diode Suppressor (12-250V DC), (Pkg. Qty. 10)

1492 Terminal Block Accessories End Barrier , Yellow, Qty. 50

4983 Surge and Filter Protection, Din Rail Mount, UL 1449 , 277/480V AC, 40kA, Replacement Surge Module

PCB connector, nominal cross section: 1.5 mm², color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, contact connection type: Socket, number of potentials: 12, number of rows: 1, number of positions: 12, number of connections: 12, product range: MC 1,5/..-ST, pitch: 3.5 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0 °, plug-in system: COMBICON MC 1,5, locking: without, mounting: without, type of packaging: packed in cardboard

Patch cable, degree of protection: IP20, cable length: 5 m, number of positions: 8, 10 Gbps, CAT6_A, connection method: Pierce connection, connection cross section: AWG 26- 26, cable outlet: straight, Ethernet

End cover, width: 5 mm, height: 62 mm, color: gray

Partition plate, width: 2.2 mm, height: 74.3 mm, color: gray

Ground terminal, number of connections: 2, connection method: Screw connection, Rated cross section: 35 mm², cross section: 10 mm²-35 mm², mounting: PE foot with mounting screw, M5, mounting type: NS 35/7,5, NS35/15, color: green-yellow

Sensor/actuator cable, 3-position, free cable end, on Valve connector BI (11mm), with 1 LED, connected with Z diode, cable length: 3 m

Sensor/actuator cable, 4-position, free cable end, on Socket straight M8, coding: A, cable length: 5 m

Sensor/actuator cable, 5-position halogen-free, free cable end, on Socket straight M12, coding: A, cable length: 10 m

Multi-channel electronic circuit breaker for protecting four loads at 24VDC in the event of overload or short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.