1088132 PHOENIX CONTACT - Technology Bsa

AXL SE IOL4 - Communication module

Axioline SmartElements, IO-Link master, IO-Link ports Class A: 4, connection method: Push-in connection, connection technology: 3-conductor, degree of protection: IP20

Cod. Articolo: 1088132

Cod. Fornitore: 1088132

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://caas.production.phoenixcontact.coremedia.cloud/caas/v1/stable/media/22530/full/b250?format=jpg Width: 14.9 mm Height: 62.2 mm Depth: 62 mm
Interfaces	SmartElement interface Number of interfaces: 1 Connection method: Card edge connector Transmission speed: See system in which you use the SmartElement. Start time until ready to operate: < 500 ms
System properties	Module ID code (hex): none Process data channel: 512 bit Input address area: 64 Byte Output address area: 64 Byte
Input data	Digital Description of the input: IO-Link ports in digital input (DI) mode Number of inputs: max. 4 (EN 61131-2 type 1) Connection method: Push-in connection Connection technology: 3-conductor Nominal input voltage U_IN: 24 VDC Input voltage range "0" signal: -0.3 VDC ... 5 VDC Input voltage range "1" signal: 11 VDC ... 30 VDC Nominal input current: typ. 2.5 mA Sensor current per channel: max. 500 mA (from L+/L-) Input filter time: 1 µs IO-Link Number of ports: 4 Connection method: Push-in connection Connection technology: 3-conductor Port type: Class A
Output data	Digital Output description: IO-Link ports in digital output (DO) mode Connection method: Push-in connection Connection technology: 2-, 3-conductor Number of outputs: max. 4 Nominal output voltage: 24 VDC Nominal current per channel: 200 mA
Product properties	Type: modular Product type: I/O component Product family: Axioline SmartElements Mounting position: See the system in which the SmartElement is used. Insulation characteristics Overvoltage category: II (IEC 60664-1, EN60664-1) Pollution degree: 2 (IEC 60664-1, EN60664-1)
Electrical properties	Supply: IO-Link Nominal voltage for I/O supply: 24 VDC Supply voltage range: 18 VDC ... 30 VDC (including all tolerances, including ripple) Nominal current for every IO-Link port: 500 mA (at L+/L-) 200 mA (at C/Q) Protective circuit: Overload protection for L+; electronically limited to 0.6A Short-circuit protection for L+; by switching off after 55ms Potentials: Communications power supply of the Smart Elements (U Supply voltage: using card edge connectors Potentials: I/O supply (U Supply voltage: 24 VDC (using card edge connectors) Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: max. 2030 mA (Internal current consumption + full load of the 4 IO-Link ports (4 x 500mA)) typ. 2020 mA Current consumption: min. 18 mA (without connected peripherals) Power consumption: max. 61 W (of which 1.45W internal losses) min. 432 mW Protective circuit: Surge protection; See the system in which the SmartElement is used. Reverse polarity protection; Polarity protection diode Electrical isolation/isolation of the voltage ranges Test voltage: Communications supply / 24 V supply (I/O): 500 VAC, 50 Hz, 1 min. Test voltage: Communications supply / functional ground: 500 VAC, 50 Hz, 1 min. Test voltage: 24V supply (I/O) / functional ground: 500 VAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: I/O Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢AxiolineSmartElementsÃ¢ user manual. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.25 mm² ... 1.5 mm² Conductor cross section flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 1.5 mm² Stripping length: 8 mm I/O Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢AxiolineSmartElementsÃ¢ user manual. Conductor cross section, rigid: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Standards and regulations	Protection class: III (IEC 61140, EN61140, VDE0140-1)
Mounting	Mounting type: Smart Element slot Mounting position: See the system in which the SmartElement is used.