Disponibile 
| Dimensions | Dimensional drawing: https://caas.production.phoenixcontact.coremedia.cloud/caas/v1/stable/media/22530/full/b250?format=jpg Width: 14.9 mm Height: 62.2 mm Depth: 62 mm |
| Interfaces | SmartElement interface Number of interfaces: 1 Connection method: Card edge connector Transmission speed: See system in which you use the SmartElement. |
| System properties | Module Input address area: 6 Byte Output address area: 5 Byte |
| Input data | Digital Input name: Safe digital inputs Description of the input: EN 61131-2, type 3 Number of inputs: 4 (2-channel assignment) 8 (1-channel assignment) Cable length: max. 200 m (200 m from the clock output to the safe input (total based on forward and return path)) Connection method: Push-in connection Connection technology: 3-conductor Input voltage range "0" signal: -3 VDC ... 5 VDC Input voltage range "1" signal: 11 VDC ... 30 VDC Nominal input voltage UIN: 24 VDC Nominal input current at UIN: typ. 2.7 mA Input filter time: 1.5 ms 3 ms (Default) 5 ms 15 ms Protective circuit: Polarity reversal protection of the inputs; Diode |
| Product properties | Type: modular Product type: I/O component Product family: Axioline SmartElements Mounting position: any Application: Functional safety SafetyBridge technology Operating mode: SafetyBridge Insulation characteristics Overvoltage category: II (IEC 60664-1) Pollution degree: 2 (EN60664-1) |
| Electrical properties | Potentials Protection: external fusing via the system in which the SmartElement is used Protective circuit: Surge protection of the supply voltage; electronic (35 V, 0.5 s) Polarity reversal protection of the supply voltage; via the system in which the SmartElement is used Potentials: AxiolineF local bus supply (U Supply voltage: 5 VDC (via bus base module) Current draw: max. 140 mA (at UBus 5VDC) typ. 101 mA (at UBus 5VDC) Potentials: Communications power supply of the Smart Elements (U Supply voltage: using card edge connectors Potentials: I/O supply (U Supply voltage: 24 VDC (using card edge connectors) Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: max. 12 mA (Power supply from Up with 30VDC, all inputs set, without power supply to the sensors via clock supplies OUT_T1 and OUT_T2) typ. 9 mA (Power supply from Up with 24VDC, all inputs set, without power supply to the sensors via clock supplies OUT_T1 and OUT_T2) Current consumption: min. 8 mA (Power supply from Up with 19.2VDC, all inputs set, without power supply to the sensors via clock supplies OUT_T1 and OUT_T2) Power consumption: max. 360 mW min. 154 mW |
| Connection data | Connection technology Connection name: I/O Note on the connection method: Note the specification in the section Conductor cross sections, and stripping and insertion lengths. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.25 mm² ... 1.5 mm² Conductor cross section flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm I/O Connection method: Push-in connection Note on the connection method: Note the specification in the section Conductor cross sections, and stripping and insertion lengths. Conductor cross section, rigid: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm |
| Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP20 Degree of protection at installation location: min. IP54 Air pressure (operation): 70 kPa ... 108 kPa Air pressure (storage/transport): 66 kPa ... 108 kPa Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) |
| Standards and regulations | Protection class: III (IEC 61140, EN61140, VDE0140-1) Air clearances and creepage distances Air clearances and creepage distances: IEC 60664-1 |
| Mounting | Mounting type: Smart Element slot Mounting position: any |
| ECLASS | ECLASS-11.0: 27242604 ECLASS-12.0: 27242604 ECLASS-13.0: 27242604 |
| ETIM | ETIM 9.0: EC001599 |
| UNSPSC | UNSPSC 21.0: 32151600 |
Di seguito alcuni articoli correlati a quello che stai vedendo
