2702655 PHOENIX CONTACT - Technology Bsa

AXL F IMPULSE2 XC 1H - Special function module

AxiolineFXC, Function module, 2digital pulse interfaces for evaluating magnetostrictive position sensors with start/stop interface, Transmission speed in the local bus 100MBit/s, Degree of protection IP20, including bus base module and AxiolineF connectors

Cod. Articolo: 2702655

Cod. Fornitore: 2702655

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/172c7c5767999646b422d3edebda44f8/-S204x204-FJPG Width: 35 mm Height: 126.1 mm Depth: 54 mm Note on dimensions: The depth applies when a THÃ35-7.5 DIN rail is used (in accordance with ENÃ60715).
Interfaces	AxiolineÃFÃlocal bus Number of interfaces: 2 Connection method: Bus base module Transmission speed: 100 Mbps
System properties	Module Input address area: 46 Byte Output address area: 46 Byte Required parameter data: 1 Byte Required configuration data: 7 Byte
Input data	Digital Input name: Digital inputs Description of the input: EN 61131-2 types 1 and 3 Number of inputs: 4 Connection method: Push-in connection Connection technology: 1-conductor Input voltage range "0" signal: -3 VÃDC ... 5 VÃDC Input voltage range "1" signal: 11 VÃDC ... 30 VÃDC Nominal input voltage U_IN: 24 VÃDC Nominal input current at U_IN: 2.4 mA Input filter time: 250 Ãµs 1000 Ãµs 3000 Ãµs Protective circuit: Polarity reversal protection of the inputs; parallel diode (30ÃV, 5Ãs)
Product properties	Type: block modular Product type: I/O component Product family: AxiolineÃF
Electrical properties	Encoder Number: 2 Nominal output voltage: 24 VÃDC (U_I - 0.5 V) Voltage range: 19.2 VÃDC ... 30 VÃDC (including all tolerances, including ripple) Current carrying capacity: typ. 500 mA Protective circuit: Surge protection; electronic (35 V, 0.5 s) Short-circuit protection; electronic Transient protection; Shielding Potentials: AxiolineÃF local bus supply (U Supply voltage: 5 VÃDC (via bus base module) Current draw: max. 150 mA Power consumption: max. 0.75 W Potentials: Feed-in of supply voltage (U Supply voltage: 24 VÃDC Supply voltage range: 19.2 VÃDC ... 30 VÃDC including all tolerances, including ripple Current draw: max. 30 mA (Supply of pulse interface, without encoder supply) Power consumption: max. 0.72 W (Supply of pulse interface, without encoder supply) Protective circuit: Surge protection; electronic (35 V, 0.5 s) Reverse polarity protection; Polarity protection diode Transient protection; Suppressor diode Electrical isolation/isolation of the voltage ranges Test voltage: Logic: 500 VÃAC, 50 Hz, 1 min. Test voltage: Pulse I/O (24 V supply): 500 VÃAC, 50 Hz, 1 min. Test voltage: Functional ground: 500 VÃAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: AxiolineÃF connector Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢Ã¢¬ÃAxiolineÃF: system and installationÃ¢Ã¢¬ user manual. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm AxiolineÃF connector Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢Ã¢¬ÃAxiolineÃF: system and installationÃ¢Ã¢¬ user manual. Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C (Standard) -40°C ... 70°C (Extended, see section Ã¢Ã¢¬ÃTested successfully: use under extreme ambient conditionsÃ¢Ã¢¬ in the data sheet.) Degree of protection: IP20 (per manufacturer's declaration) Air pressure (operation): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Standards and regulations	Protection class: III (IEC 61140, ENÃ61140, VDEÃ0140-1)
Mounting	Mounting type: DIN rail mounting