2863083 PHOENIX CONTACT - Technology Bsa

Caratteristiche Tecniche

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/20a984302842e949b5ce7beb58df3766/-S204x204-FJPG Width: 48.8 mm Height: 135 mm Depth: 71.5 mm Note on dimensions: Housing dimensions
Notes	Utilization restriction CCCex note: Use in potentially explosive areas is not permitted in China.
Interfaces	Inline local bus Number of interfaces: 2 Connection method: Inline data jumper Transmission speed: 500 kbps
System properties	Module ID code (dec.): 91 ID code (hex): 5B Length code (hex): 02 Length code (dec): 02 Process data channel: 32 bit Input address area: 4 Byte Output address area: 4 Byte Register length: 32 bit Required parameter data: 6 Byte Required configuration data: 5 Byte
Output data	Analog Output name: Analog outputs Connection technology: 2-conductor Note regarding the connection technology: shielded Number of outputs: 2 D/A converter resolution: 16 bit Protective circuit: Transient protection of outputs Short-circuit protection of outputs Representation of output values: 16 bits (15 bits + sign) DAC resolution: 16 bit Process data update: < 1 ms Current output signal: 0 mA ... 20 mA 4 mA ... 20 mA Load/output load current output: Ã¢¤ 500 Ã© Voltage output signal: 0 V ... 10 V Load/output load voltage output: Ã¢¥ 2 kÃ©
Product properties	Type: modular Product type: I/O component Product family: Inline Scope of delivery: including Inline connectors and marking fields Operating mode: Process data mode with two words Diagnostics messages: I/O supply failure I/O error message sent to the bus coupler
Electrical properties	Maximum power dissipation for nominal condition: 3.36 W Potentials Power consumption: typ. 2.1 W (entire device) Potentials: Communications power (U Supply voltage: 7.5 VDC (via voltage jumper) Current draw: max. 45 mA typ. 36 mA Potentials: Supply of analog modules (U Supply voltage: 24 VDC (via voltage jumper) Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: max. 95 mA typ. 75 mA Electrical isolation/isolation of the voltage ranges Test voltage: 7.5 V supply (bus logic), 24 V supply U_ANA / I/O: 500 VAC, 50 Hz, 1 min. Test voltage: 7.5V supply (bus logic), 24V supply U_ANA/ functional ground: 500 VAC, 50 Hz, 1 min. Test voltage: 24V supply (I/O) / functional ground: 500 VAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: Inline connector Conductor connection Connection method: Spring-cage connection Conductor cross section rigid: 0.08 mm² ... 1.5 mm² Conductor cross section flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm Inline connector Connection method: Spring-cage connection Conductor cross section, rigid: 0.08 mm² ... 1.5 mm² Conductor cross section, flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 55°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing)
Standards and regulations	Protection class: III (IEC 61140, EN61140, VDE0140-1)
Mounting	Mounting type: DIN rail mounting

Specifiche

ECLASS	ECLASS-11.0: 27242601 ECLASS-12.0: 27242601 ECLASS-13.0: 27242601
ETIM	ETIM 9.0: EC001596
UNSPSC	UNSPSC 21.0: 32151600

Download

PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00102.pdf

Application_note_00104.pdf

Approvals_00056.pdf

Approvals_00057.pdf

Approvals_00156.pdf

Approvals_01146.pdf

Approvals_01166.pdf

Approvals_01174.pdf

Approvals_01216.pdf

Approvals_01217.pdf

Approvals_01295.pdf

Approvals_01552.pdf

Data_sheet_03553.pdf

Manual_00085.pdf

Manufacturer_declaration_00465.pdf

Manufacturer_declaration_01723.pdf

Manufacturer_declaration_15251.pdf

Package_slip_01354.pdf

Product_information_00033.pdf

Product_information_00446.pdf

Technical_drawing_38953.pdf

Various_00038.pdf