Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 2862013
PHOENIX CONTACTNon disponibile

IB IL 24 DO16-2MBD-PAC - Digital module

Inline, Digital output terminal, Digital outputs:16, 24 VDC, 500 mA, connection technology:3-conductor, transmission speed in the local bus:2 Mbps, degree of protection: IP20, including Inline connectors and marking fields
Cod. Articolo: 2862013
Cod. Fornitore: 2862013
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Download
Caratteristiche Tecniche
DimensionsWidth: 48.8 mm
Height: 140.5 mm
Depth: 71.5 mm
Note on dimensions: Housing dimensions
InterfacesInline local bus
Number of interfaces: 2
Connection method: Inline data jumper
Transmission speed: 2 Mbps
System propertiesModule
ID code (dec.): 189
ID code (hex): BD
Length code (hex): 01
Length code (dec): 01
Process data channel: 16 bit
Input address area: 0 Byte
Output address area: 2 Byte
Register length: 16 bit
Required parameter data: 4 Byte
Required configuration data: 4 Byte
Output dataDigital
Output name: Digital outputs
Connection method: Spring-cage connection
Connection technology: 3-conductor
Number of outputs: 16
Protective circuit: Overload protection, short-circuit protection of outputs
Output voltage: 24 VDC (US - 1 V)
Output current: max. 500 mA (per channel)
max. 8 A (Device)
Nominal output voltage: 24 VDC
Output voltage when switched off: max. 2 V
Output current when switched off: max. 300 µA
Nominal load, inductive: 12 W (1.2 H, 48 Ω)
Nominal load, lamp: 12 W
Nominal load, ohmic: 12 VA (48Ω)
Maximum operating frequency with ohmic nominal load: max. 300 Hz (this switching frequency is limited by the data rate selected, the number of bus devices, the structure of the bus, the software used and the control or computer system used)
Behavior with overload: Auto restart
Behavior with inductive overload: Output can be destroyed
Behavior at voltage switch-off: The output follows the power supply without delay
Overcurrent shut-down: min. 0.7 A
Output current with ground connection interrupt when switched off: max. 25 mA
Product propertiesType: modular
Product type: I/O component
Product family: Inline
Scope of delivery: including Inline connectors and marking fields
No. of channels: 16
Operating mode: Process data mode with one word
Diagnostics messages: Short-circuit or overload of the digital outputs Error message in the diagnostic code (bus) and display (2 Hz) via the LED (D) on the module
Insulation characteristics
Overvoltage category: II (IEC 60664-1, EN60664-1)
Pollution degree: 2 (IEC 60664-1, EN60664-1)
Electrical propertiesNo. of channels: 16
Potentials: Communications power (U
Supply voltage: 7.5 VDC (via voltage jumper)
Current draw: max. 105 mA
Power consumption: max. 0.79 W
Potentials: Segment circuit supply (U
Supply voltage: 24 VDC (via voltage jumper)
Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple)
Current draw: max. 8 A
Electrical isolation/isolation of the voltage ranges
Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics): 500 VAC, 50 Hz, 1 min.
Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics): 500 VAC, 50 Hz, 1 min.
Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O): 500 VAC, 50 Hz, 1 min.
Test voltage: 24V supply (I/O) / functional ground: 500 VAC, 50 Hz, 1 min.
Connection dataConnection technology
Connection name: Inline connector
Conductor connection
Connection method: Spring-cage connection
Conductor cross section rigid: 0.08 mm² ... 1.5 mm²
Conductor cross section flexible: 0.08 mm² ... 1.5 mm²
Conductor cross section AWG: 28 ... 16
Stripping length: 8 mm
Inline connector
Connection method: Spring-cage connection
Conductor cross section, rigid: 0.08 mm² ... 1.5 mm²
Conductor cross section, flexible: 0.08 mm² ... 1.5 mm²
Conductor cross section AWG: 28 ... 16
Stripping length: 8 mm
Environmental and real-life conditionsAmbient conditions
Ambient temperature (operation): -25°C ... 55°C
Degree of protection: IP20
Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level)
Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level)
Ambient temperature (storage/transport): -25°C ... 85°C
Permissible humidity (operation): 10 % ... 95 % (according to DINEN61131-2)
Permissible humidity (storage/transport): 10 % ... 95 % (according to DINEN61131-2)
Standards and regulationsProtection class: III (IEC 61140, EN61140, VDE0140-1)
MountingMounting type: DIN rail mounting
Specifiche
ECLASSECLASS-11.0: 27242604
ECLASS-12.0: 27242604
ECLASS-13.0: 27242604
ETIMETIM 9.0: EC001599
UNSPSCUNSPSC 21.0: 32151600
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00104.pdf

Approvals_01216.pdf

Approvals_01217.pdf

Data_sheet_03496.pdf

Data_sheet_03495.pdf

Manual_00085.pdf

Manufacturer_declaration_00892.pdf

Manufacturer_declaration_01755.pdf

Manufacturer_declaration_05564.pdf

Package_slip_01270.pdf

Technical_drawing_38936.pdf

Various_00038.pdf