2080-OW4I ROCKWELL AUTOMATION

Caratteristiche Tecniche

Digital inputs configurable	No
Digital outputs configurable	No
Type of voltage (input voltage)	DC
Type of output voltage	DC
Type of digital output	Relay
Type of electric connection	Screw connection
Status indicator	4 yellow
Output delay time, max	OFF to ON: 10 ms, ON to OFF: 10 ms
Wiring category	2 - on signal ports, 2 - on power ports
Number of I/O	4-channel relay output
Relay contact, continuous	2.0 A @ 120V AC maximum volts, 0.35 power factor
Relay contact, make	7.5 A @ 240V AC maximum volts, 0.35 power factor
Relay contact, break	28VA @ 24V DC maximum volts, 0.35 power factor
Pilot duty rating	C300, R150
Insulation stripping length	5 mm
Wire size	0.05...1.31 mm2 (30...16 AWG) solid copper wire rated @ 90 °C (194 °F ) insulation maximum
Isolation voltage	240V (continuous), reinforce insulation type, between output channels and output channels to backplane type tested for 60 s @ 1480V AC Outputs to Outputs, Outputs to Backplane
Redundancy	No
SIL according to IEC 61508	None
Minimum load per point	10 mA
Initial contact resistance of relay, max	30 mOhm
Wire type	Copper
Backplane power	3.3V DC, 38 mA
Inrush current	<120 mA @ 3.3V, <120 mA @ 24V
Output current, resistive	2 A @ 5...30V DC, 0.5 A @ 48V DC, 0.22 A @ 125V DC, 2 A @ 125V AC, 2 A @ 240V AC
Output power, resistive, max	250VA for 125V AC resistive loads, 480VA for 240V AC resistive loads, 60VA for 30V DC resistive loads, 24VA for 48V DC resistive loads, 27.5VA for 125V DC resistive loads
Output current, inductive	1.0 A steady state @ 5...28V DC, 0.93 A steady state @ 30V DC, 0.5 A steady state @ 48V DC, 0.22 A steady state @ 125V DC, 2.0 A steady state, 15 A make @ 125V AC, PF - cos Ã¸ = 0.4, 2.0 A steady state, 7.5 A make @ 240V AC, PF - cos Ã¸ = 0.4
Surrounding air temperature, max	65 °C
North American temperature code	T4
Relative humidity	5...95% noncondensing
Operating temperature	-20 to 65 °C
Nonoperating temperature	40 to 85 °C
Enclosure type rating	None (open-style)
Terminal base screw torque, max	0.19 Nm (1.7 lb-in.), using a 2.5 mm
Shock	Operating: 10 g
Vibration	2.0 G @ 10Ã¢¦500 Hz
Mounting torque	0.2 Nm
Explosion safety category for gas	None
Explosion safety category for dust	None