5069-HSC2XOB4 ROCKWELL AUTOMATION

Type of voltage (input voltage)	DC
Type of output voltage	DC
Analogue input, current	No
Analogue input, voltage	No
Analogue output, current	No
Analogue output, voltage	No
Short-circuit protection, digital outputs available	Yes
Voltage type of supply voltage	DC
Type of digital output	Transistor
Insulation stripping length	5069-RTB18-SPRING connections: 10 mm (0.39 in.)
Suitable for safety functions	No
Time delay at signal exchange	20 ms
Analogue input, resistor	No
Analogue input, resistor temperature	No
Analogue input, thermocouple	No
Analogue input signal configurable	No
Analogue output signal configurable	No
Digital in-/outputs, configurable	Yes
Type of electric connection	Screw-/spring clamp connection
Input current, max	8 mA
Power dissipation, max	3 W
Off-state current, max	1 mA
On-state current, min	4 mA
Off-state voltage, max	1.5 V
Pulse width, min	125 ns
Pulse separation, min	100 ns
Output short circuit/overload protection	Yes
Thermal dissipation, max	10.2 BTU/h
Reverse voltage protection	32V DC
On-state voltage, nom	24V DC
On-state voltage drop, max	<0.3V DC
ON-state voltage	3...32V DC
Output voltage range	10...32V DC
Voltage category	12/24V DC source
Overvoltage protection, max	36V (fuse protected)
No load detection diagnostics	Yes (per channel diagnostics)
Output short circuit/overload/overtemp detection	Yes (per channel diagnostics)
On-state output current, min	1 mA per channel 4 mA per module
Output control in fault state per point	Hold last state, On, Off (default)
Output states in program mode per point	Hold last state, On, Off (default)
Output states in fault mode per point	Hold last state, On, Off (default)
Outputs	4 Channels (1 group of 4), sourcing
Inputs	2 quadrature (ABZ) differential inputs
Duration of fault mode per point	1 s, 2 s, 5 s, 10 s, Forever (default)
Module keying	Electronic keying via programming software
Pilot duty	Yes (make current electronically limited/protected @ 3.6 A)
Indicators	1 green/red module status indicator, 10 yellow/red I/O status indicator
Wiring category	2 - on shielded output ports, 2 - on output power ports, 2 - on shielded counter ports
Isolation voltage	250V (continuous), basic insulation type, No isolation between SA power and I/O ports, No isolation between individual I/O ports, Type tested at 1500V AC for 60 s
Wire size	5069-RTB18-SPRING connections: 0.5...1.5 mm² (22...16 AWG) solid or stranded shielded copper wire rated at 105 °C (221 °F), or greater, 2.9 mm (0.11 in.), maximum diameter including insulation 5069-RTB18-SCREW connections: 0.5Ã¢¦1.5 mm² (22Ã¢¦16 AWG) solid or
Width	22 mm
Height	144.57 mm
Depth	105.42 mm
Enclosure type	None (open-style)
Slot width	1
Weight, approx	175 g
RTB keying	None
Vibration	5 G @ 10...500 Hz
Shock	Operating: 30 G, Non operating: 50 G
RTB torque	5069-RTB18-SCREW RTB only: 0.4 Nm (3.5 lbin)
DIN rail	Compatible zinc-plated chromate-passivated steel DIN rail
Surrounding air temperature, max	60 °C
Operating temperature	0 °C
Nonoperating temperature	-40 °C
Emissions	IEC 61000-6-4
Relative humidity	5...95% noncondensing
Voltage variation	10 ms interruption on MOD Power port
ESD immunity	6 kV contact discharges, 8 kV air discharges
Conducted RF immunity	10Vrms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
EFT/B immunity	±4 kV @ 5 kHz on power ports, ±2 kV @ 5 kHz on shielded output ports, ±2 kV @ 5 kHz on shielded counter ports
Surge transient immunity	±1 kV line-line (DM) and ±2 kV line-earth (CM) on power ports, ±2 kV line-earth (CM) on shielded output ports, ±2 kV line-earth (CM) on shielded counter ports
Radiated RF immunity	10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz
North American temperature code	T4
ATEX temp code	T4
IECEx temp code	T4
SA power	3 A @ 18...32V DC
Counter input ratings	4 mA @ 3...32V DC
MOD power	50 mA @ 18...32V DC
MOD Power passthrough	9.55 A @ 18...32V DC
SA Power passthrough	9.95 A @ 10...32V DC