Industrial Automation
Product properties | Product type: Temperature transmitter Product family: MACX Analog No. of channels: 1 Type: Signal conditioner Configuration: Software HART Insulation characteristics Overvoltage category: II Pollution degree: 2 |
Electrical properties | No. of channels: 1 Step response (0â99%): 1 s (TC) 1 s (RTD) Electrical isolation Input/output Test voltage: 2 kV AC (50Hz, 60s) Supply Supply voltage range: loop-powered, no external supply necessary 11 VDC ... 36 VDC (Standard) |
Input data | Signal Input signal: Temperature Measurement Number of inputs: 1 Input voltage range: -20 mV ... 100 mV (Minimum measuring span: 5mV) Sensor types (RTD) that can be used: Pt, Ni, Cu sensors: 2, 3, 4-wire Sensor types that can be used (TC): A, B, C, D, E, J, K, L, N, R, S, T, U Temperature measuring range: -250°C ... 2500°C (Range depending on the sensor type) ⥠10 K (RTD) ⥠50 K (TC) Linear resistance measuring range: 10 é ... 2000 é (Minimum measuring span: 10é) |
Output data | Signal: Current Current output signal: 4 mA ... 20 mA 20 mA ... 4 mA Max. current output signal: 23 mA Load: (UL - 11V) / 0,023A HART coding: FSK ± 0.5mA HART version: 7 Transmission speed: 1200 Baud Mains frequency filter: 50/60 Hz Communication resistance: ⥠250 é Switch-on delay: ï» 7 s (HART) ï» 7 s (Measured value) |
Connection data | Connection method: Push-in connection Stripping length: 8 mm Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 |
Ex data | Ex installation (EPL): Gc Div.2 |
Interfaces | Data communication (bypass) Protocols supported: HART |
Signaling | Status display: LED red |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/d4485e18fd60154ba93005f91a55c68d/-S204x204-FJPG Width: 12.5 mm Height: 116 mm Depth: 113.7 mm Depth NS35/7,5: 114.5 mm (Snapped onto DIN rail NS35/7,5 in accordance with EN60715) |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 85°C Ambient temperature (storage/transport): -50°C ... 100°C Altitude: ⤠4000 m (Above sea level) Climatic class: B2 Permissible humidity (operation): 5 % ... 95 % (non-condensing) |
Approvals | CE Certificate: CE-compliant ATEX Identification: ï II 3 G Ex ec IIC T6 Certificate: PxCIF20ATEX1145192U CSA Identification: Ex ec IIC T6...T4 |
Mounting | Mounting type: DIN rail mounting |
ECLASS | ECLASS-11.0: 27210129 ECLASS-12.0: 27210129 ECLASS-13.0: 27210129 |
ETIM | ETIM 9.0: EC002919 |
UNSPSC | UNSPSC 21.0: 41112100 |
Description other products