Industrial Automation
FLT-SEC-ZP2-3C-255/7.5 - Type 1+2+3 combined lightning current and surge arresters
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | IEC test classification: I+II+III T1+T2+T3 EN type: T1+T2+T3 IEC power supply system: TN-C Type: Busbar module, one-piece Product type: Combination type Product family: SEC Family Number of positions: 3 Surge protection fault message: visual, remote signaling via optional module Insulation characteristics Overvoltage category: IV Pollution degree: 2 |
Electrical properties | Nominal frequency fN: 50 Hz (60Hz) |
Connection data | Connection method: Screw connection Screw thread: M6 Tightening torque: 2.5 Nm Stripping length: 18 mm Conductor cross section flexible: 2.5 mm² ... 35 mm² Conductor cross section rigid: 2.5 mm² ... 50 mm² |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/cc12fdfb96c0604e88062cc3ed3986a1/-S204x204-FJPG Width: 27 mm 47 mm (with spacer lid) 52 mm (with spacer lid) Height: 220.7 mm Depth: 104.4 mm Horizontal pitch: 1.5 Div. |
Material specifications | Flammability rating according to UL 94: V-0 CTI value of material: 175 Insulating material: PA 6.6 PC Material group: IIIa Housing material: PA 6.6 PC |
Mechanical properties | Mechanical data Open side panel: No |
Protective circuit | Mode of protection: L-PEN Direction of action: 3L-PEN Nominal voltage UN: 230/400VAC ±10% (TN-C) Nominal frequency fN: 50 Hz (60Hz) Maximum continuous voltage UC: 255 VAC Nominal discharge current In (8/20) µs: 20 kA Combination wave UOC: 20 kV Impulse discharge current (10/350)µs, charge: 3.75 As Impulse discharge current (10/350)µs, specific energy: 15 kJ/é Impulse discharge current (10/350)µs, peak value limp: 7.5 kA Total discharge current Itotal (10/350)µs: 22.5 kA Follow current interrupt rating Ifi: 25 kA Short-circuit current rating ISCCR: 25 kA Voltage protection level Up: ⤠1.5 kV Front of wave sparkover voltage at 6 kV (1.2/50) µs: ⤠1.5 kV TOV behavior at UT: 442 VAC (120min / withstand mode) Response time tA: ⤠100 ns Max. backup fuse with branch wiring: 160 A (gG) |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20C (Installed) Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠6000 m (amsl) Permissible humidity (operation): 5 % ... 95 % |
Standards and regulations | Standards/specifications: IEC 61643-11 EN61643-11 Note: 2011 2012 + A11:2018 |
Mounting | Mounting type: Busbar 40 mm |
ECLASS | ECLASS-11.0: 27130802 ECLASS-13.0: 27171201 |
ETIM | ETIM 9.0: EC000381 |
UNSPSC | UNSPSC 21.0: 39121600 |
Description other products