1180145 PHOENIX CONTACT - Technology Bsa

VAL-EV-T2 280/3+1-R - Type 2 surge arrester

CHARX protect basic: Plug-in surge protective device, in accordance with Type 2/ClassII, for 3-phase power supply networks with separate N and PE (5-conductor system:L1,L2,L3,N,PE), with remote indication contact. Specifically designed for use in e-mobility.

Product Code: 1180145

Partner cod.: 1180145

PHOENIX CONTACT

Product properties	IEC test classification: II T2 EN type: T2 IEC power supply system: TN-S TT Type: DIN rail module, two-section, divisible Product type: Surge arrester Product family: VALVETRAB MS Number of positions: 4 Surge protection fault message: Optical, remote indicator contact Insulation characteristics Overvoltage category: III Pollution degree: 2
Electrical properties	Nominal frequency f_N: 50 Hz (60Hz) Indicator/remote signaling Connection name: Remote fault indicator contact Switching function: Changeover contact Operating voltage: 5 VAC ... 250 VAC 30 VDC Operating current: 5 mA AC ... 750 mA AC 1 ADC
Connection data	Connection method: Screw connection Fork-type cable lug Screw thread: M5 Tightening torque: 3 Nm (1.5mm² ... 16mm²) 4.5 Nm (25mm²...35mm²) Stripping length: 16 mm Conductor cross section flexible: 1.5 mm² ... 25 mm² 1.5 mm² ... 16 mm² Conductor cross section rigid: 1.5 mm² ... 35 mm² Conductor cross section AWG: 15 ... 2 Remote fault indicator contact Connection method: Plug-in/screw connection via COMBICON Screw thread: M2 Tightening torque: 0.25 Nm Stripping length: 7 mm Conductor cross section flexible: 0.14 mm² ... 1.5 mm² Conductor cross section rigid: 0.14 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/c9329e824dc5274e831fa0e6683a4f12/-S204x204-FJPG Width: 71 mm Height: 98.7 mm Depth: 65.7 mm (incl. DIN rail 7.5mm) Horizontal pitch: 4 Div.
Material specifications	Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6/PBT Material group: I Housing material: PA 6.6 PBT
Mechanical properties	Mechanical data Open side panel: No
Protective circuit	Mode of protection: L-N L-PE N-PE Direction of action: 3L-N & N-PE Nominal voltage U_N: 240/415VAC (TN-S) 240/415VAC (TT) Nominal frequency f_N: 50 Hz (60Hz) Maximum continuous operating voltage U_C(L-N): 280 VAC Maximum continuous operating voltage U_C (L-PE): 280 VAC Maximum continuous operating voltage U_C (N-PE): 260 VAC Rated load current I_L: 80 A Residual current I_PE: Ã¢¤ 5 µA Standby power consumption P_C: Ã¢¤ 450 mVA Nominal discharge current I_n (8/20) µs: 20 kA Maximum discharge current I_max (8/20) µs: 40 kA Follow current interrupt rating I_fi (N-PE): 100 A Short-circuit current rating I_SCCR: 25 kA Voltage protection level U_p (L-N): Ã¢¤ 1.5 kV Voltage protection level U_p (L-PE): Ã¢¤ 1.9 kV Voltage protection level U_p (N-PE): Ã¢¤ 1.5 kV Residual voltage U_res (L-N): Ã¢¤ 1.5 kV (at I_n) Ã¢¤ 1.3 kV (at 10 kA) Ã¢¤ 1.2 kV (at 5 kA) Ã¢¤ 1.1 kV (at 3kA) Residual voltage U_res (L-PE): Ã¢¤ 1.9 kV (at I_n) Ã¢¤ 1.5 kV (at 10 kA) Ã¢¤ 1.3 kV (at 5 kA) Ã¢¤ 1.2 kV (at 3kA) Residual voltage U_res (N-PE): Ã¢¤ 0.4 kV (at I_n) Ã¢¤ 0.25 kV (at 10 kA) Ã¢¤ 0.15 kV (at 5 kA) Ã¢¤ 0.1 kV (at 3kA) TOV behavior at U_T (L-N): 415 VAC (5s / withstand mode) 440 VAC (120min / safe failure mode) TOV behavior at U_T (N-PE): 1200 VAC (200ms / withstand mode) Response time t_A (L-N): Ã¢¤ 25 ns Response time t_A (L-PE): Ã¢¤ 100 ns Response time t_A (N-PE): Ã¢¤ 100 ns Max. backup fuse with V-type through wiring: 80 A (gG) Max. backup fuse with branch wiring: 125 A (gG)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 (only when all terminal points are used) Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: Ã¢¤ 2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation): 5g (10 ... 500 Hz / 2.5 h / X, Y, Z)
Standards and regulations	Standards/specifications: IEC 61643-11 EN61643-11 Note: 2011 2012
Mounting	Mounting type: DIN rail: 35 mm