Industrial Automation
Notes | General: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.by using cable ties. |
Mounting | Assembly instructions: This connector includes one seal for small and one seal for large outer cable diameters. Connection method: Screw connection |
Product properties | Product type: Circular connector (cable-side) Number of positions: 5 No. of cable outlets: 2 Shielded: no Coding: A Cable outlet: straight Pg screw connection: Pg11 Insulation characteristics Overvoltage category: II Degree of pollution: 3 |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/d7dfef8bb2425c48a641841bf152198a/-S204x204-FJPG Length: 63 mm External dimensions Outside diameter: 2x 2.1 mm ... 3 mm (when using the seal for small outer cable diameters) 2x 4 mm ... 5.2 mm (when using the seal for large outer cable diameters) Housing Diameter housing: 20 mm |
Material specifications | Seal material: NBR Material of grip body: PA Contact material: CuZn Contact surface material: Au Contact carrier material: PA Material for screw connection: Stainless steel 1.4404 |
Connection data | Conductor connection Connection method: Screw connection Connection cross section: 0.25 mm² ... 0.75 mm² (without ferrule) 0.14 mm² ... 0.75 mm² (with ferrule) 0.25 mm² ... 0.75 mm² (solid) Connection cross section AWG: 24 ... 18 (without ferrule) 26 ... 20 (with ferrule) Stripping length of the individual wire: 5 mm Tightening torque: 0.4 Nm (M12 knurl) 0.8 Nm ... 1 Nm 0.2 Nm (Screw terminal blocks) |
Electrical properties | Rated surge voltage: 1.5 kV Contact resistance: ⤠8 mé Insulation resistance: ⥠100 Mé Nominal voltage UN: 48 VAC 60 VDC Nominal current IN: 4 A |
Connector | Connection 1 Head design: Plug Head cable outlet: straight Head thread type: M12 Coding: A |
Cable/line | Stripping length of the individual wire: 5 mm |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP67 Ambient temperature (operation): -40°C ... 85°C (Plug / socket) |
Standards and regulations | M12 Standard designation: M12 connector Standards/specifications: IEC 61076-2-101 |
Description other products