Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2313478
PHOENIX CONTACTNot available

FL COMSERVER BASIC 232/422/485 - Interface converters

Second generation FL COMSERVER BASIC..., serial device server for converting a serial RS-232/422/485 interface to Ethernet, only supports TCP and UDP applications, incl. Com Port Redirector software and user documentation (PDF)
Product Code: 2313478
Partner cod.: 2313478
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Download
Tecnichal data
NotesUtilization restriction
EMC note: EMC: class A product, see manufacturer's declaration in the download area
Utilization restriction​
CCCex note: Use in potentially explosive areas is not permitted in China.
Product propertiesProduct type: Interface converter
Application: TCP, UDP
MTTF: 2001 Years (SN29500 standard, temperature25°C, operating cycle21%)
870 Years (SN29500 standard, temperature40°C, operating cycle34.25%)
355 Years (SN29500 standard, temperature40°C, operating cycle100%)
MTBF: 666 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
179 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))
System propertiesSystem requirements
Supported browsers: Netscape Communicator versions 4.5 and up or Internet Explorer versions 5.5 and up
Electrical propertiesElectrical isolation: VCC // Ethernet // Serial
Maximum power dissipation for nominal condition: 2.4 W
Test voltage data interface/data interface: 1.5 kVrms (50Hz, 1min.)
Test voltage data interface/power supply: 1.5 kVrms (50Hz, 1min.)
1.5 kVrms
Supply
Supply voltage range: 19.2 V AC/DC ... 28.8 V AC/DC (via pluggable COMBICON screw terminal block)
22.8 VDC ... 25.2 VDC (as an alternative or redundant, via backplane bus contact and system current supply)
Nominal supply voltage: 24 V AC/DC ±20% (via pluggable COMBICON screw terminal block)
24 VDC ±5% (as an alternative or redundant, via backplane bus contact and system current supply)
Typical current consumption: 100 mA (24VDC)
Function
Management: Web-based management, SNMP, emergency exit with Telnet and serial
Status and diagnostic indicators: LEDs: UL (logic voltage), TD + RD (data activity serial), FD (full duplex), 100 (100 Mbps mode), Link (Ethernet), Activity (Ethernet), ERR (error)
Connection dataSupply
Tightening torque: 0.56 Nm ... 0.79 Nm
InterfacesSignal: Ethernet
Web server: yes
Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Serial transmission speed: 10/100 Mbps, auto negotiation
Connection method: RJ45 jack, shielded
No. of channels: 1
Transmission length: ≤ 100 m (shielded twisted pair)
Protocols supported: TCP/IP, UDP
Auxiliary protocols: ARP, DHCP, BOOTP, SNMP, RIP, RARP, HTTP, TFTP, ICMP
Data: V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN66259-1
Serial transmission speed: 0.3; 0.6; 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 38.4; 57.6; 115.2; 187.5; 230.4 kbps
Connection method: D-SUB9 plug
Pin assignment: DTE/DCE switchover via web-based management
Transmission length: 15 m
File format/coding: UART/NRZ: 7/8 Bit Data, 1/2 Bit Stopp, None/Even/Odd Parity
Data flow control/protocols: Software handshake, Xon/Xoff or hardware handshake RTS/CTS
Data: RS-422 interface in acc. with ITU-T V.11, EIA/TIA-422, DIN 66348-1
Serial transmission speed: 0.3; 0.6; 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 38.4; 57.6; 115.2; 187.5; 230.4; 500; 1000 kbps
Connection method: Plug-in/screw connection via COMBICON
Transmission length: ≤ 1200 m
Termination resistor: 390 Ω (configurable)
180 Ω
390 Ω
File format/coding: UART/NRZ: 7/8 Bit Data, 1/2 Bit Stopp, None/Even/Odd Parity
Data flow control/protocols: Automatic control
Data: RS-485 interface, in acc. with EIA/TIA-485, DIN 66259-4/RS-485 2-wire
Serial transmission speed: 0.3; 0.6; 1.2; 2.4; 4.8; 7.2; 9.6; 19.2; 38.4; 57.6; 115.2; 187.5; 230.4; 500; 1000 kbps
Connection method: Plug-in/screw connection via COMBICON
Termination resistor: 390 Ω (configurable)
180 Ω
390 Ω
File format/coding: UART/NRZ: 7/8 Bit Data, 1/2 Bit Stopp, None/Even/Odd Parity
Data flow control/protocols: Automatic control
DimensionsWidth: 22.5 mm
Height: 99 mm
Depth: 116 mm
Material specificationsMaterial: PA 6.6-FR
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP20
Ambient temperature (operation): -25°C ... 60°C
-20°C ... 60°C (in acc. with UL)
Ambient temperature (storage/transport): -25°C ... 70°C
Altitude: ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Permissible humidity (operation): 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
ApprovalsCE
Certificate: CE-compliant
EAC
Identification: EAC
ATEX
Identification:  II 3G Ex nA IIC T4 Gc X
Note: Please follow the special installation instructions in the documentation!
UL, USA/Canada
Identification: 508 Listed
Class I, Div. 2, Groups A, B, C, D
UL, USA
Identification: Class I, Zone 2, AEx nA IIC T5
UL, Canada
Identification: Class I, Zone 2, Ex nA IIC T5 Gc X
KC approval for South Korea
Certificate: KCC-REI-PCK-FL2313478
Corrosive gas test
Identification: ISA-S71.04-1985 G3 Harsh Group A
EMC dataNoise immunity: EN 61000-6-2:2005
Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU
Noise emission: EN 61000-6-4
Electrostatic discharge
Standards/regulations: EN61000-4-2
Electrostatic discharge​
Contact discharge: ± 6 kV
Discharge in air: ± 8 kV
Comments: Criterion B
Electromagnetic HF field
Standards/regulations: EN61000-4-3
Electromagnetic HF field​
Field intensity: 10 V/m
Comments: Criterion A
Fast transients (burst)
Standards/regulations: EN61000-4-4
Fast transients (burst)​
Input: 2 kV (5kHz)
Signal: 1 kV (5kHz)
Comments: Criterion A
Surge current load (surge)
Standards/regulations: EN61000-4-5
Surge current load (surge)​
Input: 2 kV
Signal: 1 kV
Comments: Criterion B
Conducted interference
Standards/regulations: EN61000-4-6
Conducted interference​
Comments: Criterion A
Voltage: 10 V
Emitted interference
Standards/regulations: EN55032
Criteria
Criterion A: Normal operating behavior within the specified limits.
Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.
Standards and regulationsFree from substances that could impair the application of coating: in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0
Standards/regulations: EN50121-4
MountingMounting type: DIN rail mounting
Technical Specs
ECLASSECLASS-11.0: 27242208
ECLASS-12.0: 27242208
ECLASS-13.0: 27242208
ETIMETIM 9.0: EC001423
UNSPSCUNSPSC 21.0: 43222600
Description
Second generation FL COMSERVER BASIC..., serial device server for converting a serial RS-232/422/485 interface to Ethernet, only supports TCP and UDP applications, incl. Com Port Redirector software and user documentation (PDF)
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00110.pdf

Approvals_00056.pdf

Approvals_00057.pdf

Approvals_01261.pdf

Approvals_01328.pdf

Approvals_01329.pdf

Data_sheet_03071.pdf

Manual_00117.pdf

Manufacturer_declaration_00571.pdf

Manufacturer_declaration_05543.pdf

Manufacturer_declaration_14221.pdf

Manufacturer_declaration_17707.pdf

Package_slip_01084.pdf

Technical_drawing_37251.pdf

Various_00062.pdf

Various_00059.pdf

Various_00058.pdf

Various_00063.pdf

Various_00060.pdf

Various_00054.pdf

Various_00057.pdf

Various_00003.pdf

Various_00065.pdf

Various_00055.pdf

Various_00061.pdf

Various_00056.pdf