Available 
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/3f783436b27c3846a361ee861b282789/-S204x204-FJPG Width: 53.6 mm Height: 126.1 mm Depth: 54 mm Note on dimensions: Housing dimensions |
| Interfaces | AxiolineFlocal bus No. of channels: 1 Connection method: Bus base module |
| System properties | Module Input address area: 8 Byte Output address area: 8 Byte Required parameter data: 1 Byte Required configuration data: 7 Byte |
| Output data | Digital Output name: Digital outputs Connection method: Direct plug-in technology Connection technology: 2-, 3-conductor Number of outputs: 4 (for 2-channel assignment) 8 (for 1-channel assignment) 8 Protective circuit: Overload protection, freewheeling circuit for inductive loads,Discharge circuit for accelerated discharge of capacitive loads Output voltage: 24 VDC Output current: max. 2 A (per channel) max. 1.5 A (per channel according to CULUS) max. 4 A (per group) max. 3 A (per group according to CULUS) max. 8 A (Total current of all outputs; Please observe the notes in the user manual.) max. 6 A (Total current of all outputs according to CULUS) Maximum output current per channel: 2 A Maximum output current per module / terminal block: 8 A Behavior with overload: Affected output is disabled and a diagnostic message is generated. |
| Product properties | Type: modular Product type: I/O component Product family: AxiolineF Application: Functional safety SafetyBridge technology |
| Electrical properties | Transmission medium: Copper Potentials Protective circuit: Protection against polarity reversal, EMC protective circuit, undervoltage detection Potentials: AxiolineF local bus supply (U Supply voltage: 5 VDC (via bus base module) Current draw: max. 280 mA typ. 260 mA (all outputs set; supply by UO of 19.2VDC...30VDC) Potentials: Supply for digital output modules (U Supply voltage: 24 VDC Supply voltage range: 19.2 VDC ... 30.2 VDC (including all tolerances, including ripple) Current draw: typ. 25 mA (all outputs set; supply from UO with 30VDC; without supply to the actuators) |
| Connection data | Connection technology Connection name: AxiolineF connector Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm AxiolineF connector Connection method: Push-in connection Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm |
| Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -35°C ... 60°C (Mounting position: any) Degree of protection: IP20 Air pressure (operation): 70 kPa ... 108 kPa (up to 3000m above sea level) Air pressure (storage/transport): 66 kPa ... 108 kPa (up to 3500m above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 10 % ... 75 % (on average, 85% infrequently, non-condensing) Permissible humidity (storage/transport): 10 % ... 75 % (non-condensing) |
| Standards and regulations | Protection class: III (IEC 61140, EN61140, VDE0140-1) |
| Mounting | Mounting type: DIN rail mounting |
| ECLASS | ECLASS-11.0: 27242604 ECLASS-12.0: 27242604 ECLASS-13.0: 27242604 |
| ETIM | ETIM 9.0: EC001599 |
| UNSPSC | UNSPSC 21.0: 32151600 |
Description other products
