2702540 PHOENIX CONTACT - Technology Bsa

FL WLAN 2101 - Wireless module

WLAN access point, client for USA and Canada, with 2Ë½internal antennas for single-hole mounting, IP66/IP68, WLAN 802.11 a, b, g, n, frequency: 2.4GHz, 5GHz, connections: COMBICON 9...32VDC, RJ45: for LAN, web, http/https, CLI

Product Code: 2702540

Partner cod.: 2702540

PHOENIX CONTACT

Notes	Trade restriction CE note: The products are offered exclusively for export outside the EU and the European Economic Area.
Product properties	Type: Stand-Alone Product type: Wireless module Insulation characteristics Overvoltage category: none Pollution degree: 2 Wireless card Number: 1 Type: IEEE 802.11 a/b/g/n 2.4GHz and 5GHz to 300 Mbps Assembly instructions: Permanently installed
Electrical properties	Supply: Module electronics Connection technology: COMBICON Connection method: Push-in spring connection Note on the connection method: Recommended conductor cross section: 0.75 mm² Recommended ferrule: connection length 10 mm Recommended crimping pliers: trapezoidal or square Designation: 1966101 FMC 1,5/ 3-STF-3,5 Number of positions: 3 Cross section range AWG: 24 ... 16 (Use copper wires rated 75° C (UL)) Supply voltage: 24 VDC (SELV) Supply voltage range: 18 VDC ... 32 VDC (PELV/SELV) 9 VDC ... 32 VDC (PELV/SELV (HW version06 or later)) Supply current: typ. 120 mA (at 24 V DC) Current consumption: max. 250 mA (at 18 V DC) max. 400 mA (at 9 V DC)
Connection data	1966101 FMC 1,5/ 3-STF-3,5 Connection method: Push-in spring connection Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 10 mm
Interfaces	Antenna Number: 2 Connection method: permanently installed Note on the connection method: MIMO Gain: 5 dBi Functions Operating modes: Access Point / Client Adapter / Repeater Configuration: Web-based management, automated CLI Quality of service (QoS): Yes Security: 802.11i WPA PSK (preshared key) WPA2 AES TKIP MAC filter Supports 802.1X/RADIUS Wireless licenses: USA, Canada Country support: USA Canada Ethernet (RJ45) Number of interfaces: 1 Connection method: RJ45 Note on the connection method: Auto negotiation and autocrossing Transmission speed: 10/100 Mbps Transmission physics: Copper Transmission length: 100 m (per segment) No. of channels: 1 (RJ45 ports) Wireless Designation: Wireless LAN Antenna connection method: (Internal) Frequency band: 2.4 GHz 5 GHz Wireless standard: WLAN IEEE 802.11 a b g n Transmission power: max. 20 dBm (EIRP) Number of wireless interfaces: 1 IEEE 802. 11 a/b/g/n Wireless modules that can be connected: 60 (In access point mode)
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/c9b6278ff7978e438782d302c8238719/-S204x204-FJPG Width: 62.8 mm Height: 36.5 mm Depth: 113.2 mm Note on dimensions: Outside dimensions
Material specifications	Material base plate: Die-cast zinc, nickel-plated Housing material: Polycarbonate, PC
Environmental and real-life conditions	Ambient conditions Degree of protection: IP65 IP66 IP67 IP68 Ambient temperature (operation): -40°C ... 60°C Note: Degree of protection when installed Air pressure (operation): 800 hPa ... 1080 hPa (up to 2000m above sea level) Air pressure (storage/transport): 660 hPa ... 1080 hPa (up to 3500m above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
EMC data	Emitted interference Standards/regulations: FCC/CFR 47, Part 15.107 Test result: ClassB Emitted interferenceÃ¢ Standards/regulations: FCC/CFR 47, Part 15.109 Test result: ClassA Emitted interferenceÃ¢Ã¢ Standards/regulations: ICES-003 Issue 6 section 6.1 Test result: ClassB Emitted interferenceÃ¢Ã¢Ã¢ Standards/regulations: ICES-003 Issue 6 section 6.2 Test result: ClassA
Mounting	Mounting type: Single-hole mounting Assembly instructions: Internal antenna