2702655 PHOENIX CONTACT - Technology Bsa

Tecnichal data

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/172c7c5767999646b422d3edebda44f8/-S204x204-FJPG Width: 35 mm Height: 126.1 mm Depth: 54 mm Note on dimensions: The depth applies when a TH35-7.5 DIN rail is used (in accordance with EN60715).
Interfaces	AxiolineFlocal bus Number of interfaces: 2 Connection method: Bus base module Transmission speed: 100 Mbps
System properties	Module Input address area: 46 Byte Output address area: 46 Byte Required parameter data: 1 Byte Required configuration data: 7 Byte
Input data	Digital Input name: Digital inputs Description of the input: EN 61131-2 types 1 and 3 Number of inputs: 4 Connection method: Push-in connection Connection technology: 1-conductor Input voltage range "0" signal: -3 VDC ... 5 VDC Input voltage range "1" signal: 11 VDC ... 30 VDC Nominal input voltage U_IN: 24 VDC Nominal input current at U_IN: 2.4 mA Input filter time: 250 µs 1000 µs 3000 µs Protective circuit: Polarity reversal protection of the inputs; parallel diode (30V, 5s)
Product properties	Type: block modular Product type: I/O component Product family: AxiolineF
Electrical properties	Encoder Number: 2 Nominal output voltage: 24 VDC (U_I - 0.5 V) Voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current carrying capacity: typ. 500 mA Protective circuit: Surge protection; electronic (35 V, 0.5 s) Short-circuit protection; electronic Transient protection; Shielding Potentials: AxiolineF local bus supply (U Supply voltage: 5 VDC (via bus base module) Current draw: max. 150 mA Power consumption: max. 0.75 W Potentials: Feed-in of supply voltage (U Supply voltage: 24 VDC Supply voltage range: 19.2 VDC ... 30 VDC including all tolerances, including ripple Current draw: max. 30 mA (Supply of pulse interface, without encoder supply) Power consumption: max. 0.72 W (Supply of pulse interface, without encoder supply) Protective circuit: Surge protection; electronic (35 V, 0.5 s) Reverse polarity protection; Polarity protection diode Transient protection; Suppressor diode Electrical isolation/isolation of the voltage ranges Test voltage: Logic: 500 VAC, 50 Hz, 1 min. Test voltage: Pulse I/O (24 V supply): 500 VAC, 50 Hz, 1 min. Test voltage: Functional ground: 500 VAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: AxiolineF connector Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢AxiolineF: system and installationÃ¢ user manual. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm AxiolineF connector Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢AxiolineF: system and installationÃ¢ user manual. Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C (Standard) -40°C ... 70°C (Extended, see section Ã¢Tested successfully: use under extreme ambient conditionsÃ¢ in the data sheet.) Degree of protection: IP20 (per manufacturer's declaration) Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Standards and regulations	Protection class: III (IEC 61140, EN61140, VDE0140-1)
Mounting	Mounting type: DIN rail mounting

Technical Specs

ECLASS	ECLASS-11.0: 27242605 ECLASS-12.0: 27242605 ECLASS-13.0: 27242605
ETIM	ETIM 9.0: EC001601
UNSPSC	UNSPSC 21.0: 32151600

Description

Axioline F, Function module, 2 digital pulse interfaces for evaluating magnetostrictive position sensors with start/stop interface, Transmission speed in the local bus 100 MBit/s, Degree of protection IP20, including bus base module and Axioline F connectors

Download

PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_01759.pdf

Approvals_01935.pdf

Data_sheet_03363.pdf

Manual_00006.pdf

Manual_00007.pdf

Manufacturer_declaration_00970.pdf

Manufacturer_declaration_01902.pdf

Manufacturer_declaration_05480.pdf

Manufacturer_declaration_05562.pdf

Manufacturer_declaration_05563.pdf

Manufacturer_declaration_14705.pdf

Package_slip_00746.pdf

Technical_drawing_37855.pdf

Various_00004.pdf