Industrial Automation
AXL F SGI2 1H - Analog module
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/172c7c5767999646b422d3edebda44f8/-S204x204-FJPG Width: 35 mm Height: 126.1 mm Depth: 54 mm Note on dimensions: The depth applies when a TH35-7.5 DIN rail is used (in accordance with EN60715). |
Interfaces | AxiolineFlocal bus Number of interfaces: 2 Connection method: Bus base module Transmission speed: 100 Mbps |
System properties | Module ID code (hex): none Input address area: 12 Byte Output address area: 12 Byte Required parameter data: 48 Byte Required configuration data: 7 Byte |
Input data | Analog Description of the input: Input channels for strain gauge Number of inputs: 2 Connection technology: 6 or 4-wire, twisted pair shielded cable Bridge difference Ud: Measuring range specified by selecting the characteristic -35mV...+35mV Bridge voltage U0: 5 V Measured value representation: 32bits Characteristics: can be parameterized: 350üV/V ... 6500üV/V Contacts Description: Floating N/O contact Quantity: 2 (Ka1-Kb1, Ka2-Kb2) Contact resistance: < 1 é (typical) < 3 é (maximum) Typical response time: typ. 0.2 ms (opening) typ. 2 ms (close) |
Output data | Analog Output description: Jumper supply Number of outputs: 2 Impedance: > 43 é (per channel) Output voltage: typ. 5 V Output current: max. 115 mA (per channel) |
Product properties | Type: block modular Product type: I/O component Product family: AxiolineF Mounting position: any (no temperature derating) Scope of delivery: including bus base module and AxiolineF connectors Operating mode: Process data mode with 6 words |
Electrical properties | Potentials Power consumption: typ. 1.5 W (entire device) max. 3 W (entire device) Potentials: AxiolineF local bus supply (U Supply voltage: 5 VDC (via bus base module) Current draw: max. 75 mA typ. 65 mA Power consumption: max. 375 mW typ. 325 mW Potentials: Supply for analog modules (U Supply voltage: 24 VDC Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: typ. 110 mA (with maximum load: 8 weighing cells with 350é per channel) typ. 25 mA (with typical load: 1 weighing cell with 350é, only one channel loaded) typ. 55 mA (with maximum load: 8 weighing cells with 350é, only one channel loaded) Power consumption: typ. 2.6 W (with maximum load: 8 weighing cells with 350é per channel) Protective circuit: Surge protection; Suppressor diode Reverse polarity protection; Polarity protection diode Electrical isolation/isolation of the voltage ranges Test voltage: Logic: 500 VAC, 50 Hz, 1 min. Test voltage: 24 V supply (I/O): 500 VAC, 50 Hz, 1 min. Test voltage: Analog inputs: 500 VAC, 50 Hz, 1 min. Test voltage: N/O contact Ka1 - Kb1: 500 VAC, 50 Hz, 1 min. Test voltage: N/O contact Ka2 - Kb2: 500 VAC, 50 Hz, 1 min. Test voltage: Functional ground: 500 VAC, 50 Hz, 1 min. |
Connection data | Connection technology Connection name: AxiolineF connector Note on the connection method: Please observe the information provided on conductor cross sections in the âAxiolineF: system and installationâ user manual. Applications with UL approval: only use copper conductors. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm AxiolineF connector Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the âAxiolineF: system and installationâ user manual. Applications with UL approval: only use copper conductors. Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm |
Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) |
Standards and regulations | Protection class: III (IEC 61140, EN61140, VDE0140-1) |
Mounting | Mounting type: DIN rail mounting Mounting position: any (no temperature derating) |
ECLASS | ECLASS-11.0: 27242601 ECLASS-12.0: 27242601 ECLASS-13.0: 27242601 |
ETIM | ETIM 9.0: EC001596 |
UNSPSC | UNSPSC 21.0: 32151600 |
Description other products