2702971 PHOENIX CONTACT - Technology Bsa

IOA-PSR-PS22-1NO-1NC-24DC - Coupling relay

Plug-in SIL coupling relay as an input/output accessory for VIP base module, SIL3 high- and low-demand applications, safe-state-off, couples digital output signals to the periphery, one enabling current path, one confirmation current path, test pulse filter

Product Code: 2702971

Partner cod.: 2702971

PHOENIX CONTACT

Product properties	Product type: Coupling relay Product family: PSRmini Application: Safe switch off High demand Low demand Ex Relay type: Electromechanical relay with force-guided contacts in accordance with IEC/ENÃ61810-3 Times Typ. starting time with U_s: 150 ms (when controlled via pinsÃ05/06) Typical release time: 30 ms (when controlled via pinsÃ05/06) Recovery time: 500 ms
Electrical properties	Maximum power dissipation for nominal condition: 1.86 W (at U_BÃ=Ã30ÃVÃDC, U_BDÃ=Ã30ÃVÃDC, I_LÃ=Ã9ÃA²) Nominal operating mode: 100% operating factor Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 VÃAC Rated surge voltage/insulation: Basic insulation 4ÃkV between all current paths and housing Safe isolation, 6ÃkV reinforced insulation from the control circuit (05/06) and diagnostics circuit (03/04/02) to the enabling current path (15/19) Supply Rated control circuit supply voltage U_S: 19.5 VÃDC ... 30 VÃDC 24 VÃDC -20Ã%Ã/Ã+25Ã% Rated control supply current I_S: typ. 25 mA Power consumption at U_S: typ. 0.77 W Inrush current: typ. 100 mA (ÃÃ¢tÃ<Ã50Ãms at U_s) Filter time: max. 3 ms (at pinsÃ05/06 in the event of voltage dips at U_s) max. 3 ms (at pinsÃ05/06; low test pulse width) Ã¢Ã¢°¥ 50 ms (at pinsÃ05/06; low test pulse width) max. 17 ms (at pinsÃ05/06; high test pulse width) Ã¢Ã¢°¥ 600 ms (at pinsÃ05/06; high test pulse width) Diagnostic supply voltage U_D: 24 VÃDC -20Ã%Ã/Ã+25Ã% (at pinÃ04) Input current at U_D: 7 mA (at pinsÃ04/03 for U_D; +Ã100ÃmA depending on load at pinÃ02) Inrush current at U_D: typ. 200 mA (ÃÃ¢tÃ<Ã1Ãms; at pinsÃ04/03 for U_D) Protective circuit: Surge protection; 35ÃV suppressor diode (pinsÃ05/06)33ÃV suppressor diode (pinsÃ04/03)35ÃV suppressor diode (pinsÃ02/03) Polarity reversal protection for rated control circuit supply voltage and diagnostic supply voltage
Output data	Relay: Enabling current path Output description: safety-related N/O contacts Number of outputs: 1 (undelayed) Contact switching type: 1 enabling current path Contact material: AgSnO₂ Switching voltage: min. 12 V AC/DC max. 230 V AC/DC (Observe the load curve) Switching capacity: min. 60 mW Inrush current: min. 3 mA max. 3 A Switching capacity in accordance with IEC 60947-5-1: 3 A (24ÃV (DC13)) 3 A (230 V (AC15)) Limiting continuous current: 3 A (observe derating) Sq. Total current: 9 A² (observe derating) Mechanical service life: 10x 10⁶ cycles Output fuse: 3 A gL/gG Relay: Confirmation current path Output description: Safety-related N/C contacts Number of outputs: 1 (undelayed) Contact switching type: 1 confirmation current path Contact material: AgCuNi, + Au Switching voltage: min. 19.2 VÃDC max. 30 VÃDC Switching capacity: min. 20 mW Inrush current: min. 1 mA max. 100 mA Limiting continuous current: 100 mA Output fuse: 150 mA Fast-blow
Connection data	Connection technology pluggable: yes Conductor connection Connection method: Pluggable onto VIP base module
Signaling	Status display: 2 x LED bi-color (green, red)
Dimensions	Width: 10 mm Height: 75 mm Depth: 112 mm
Material specifications	Housing material: PA 6.6
Characteristics	Safety data Stop category: 0 Safety data: ENÃISOÃ13849 Category: 4 Performance level (PL): e Safety data: ENÃ50156-2 Safety Integrity Level (SIL): 3 (Reference IEC 61508) Safety data: IEC 61508 - High demand Safety Integrity Level (SIL): 3 (<Ã15%Ãof the overall SIL) Safety dataÃ¢Ã¢¬Ã¢¹ Safety Integrity Level (SIL): 3 (<Ã15%Ãof the overall SIL) Safety data: IEC 61508 - Low demand Safety Integrity Level (SIL): 3 (<Ã15%Ãof the overall SIL) Safety dataÃ¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Safety Integrity Level (SIL): 3 (<Ã15%Ãof the overall SIL) Safety data: IEC 61508 - Low demandÃ¢Ã¢¬Ã¢¹ Safety Integrity Level (SIL): 3 (<Ã15%Ãof the overall SIL) Safety data: ENÃIEC 62061 Safety Integrity Level (SIL): 3
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Min. degree of protection of inst. location: IP54 Ambient temperature (operation): -40°C ... 70°C (observe derating) Ambient temperature (storage/transport): -40°C ... 85°C Maximum altitude: Ã¢Ã¢°¤ 2000 m (Above sea level) Max. permissible humidity (storage/transport): 75 % (on average, 85% infrequently, non-condensing) Max. permissible relative humidity (operation): 75 % (on average, 85% infrequently, non-condensing) Shock: 15 g (in the event of continuous stress caused by shock, contact reactions are possible.) Vibration (operation): 10ÃHzÃ...Ã150ÃHz, 2g
Approvals	ATEX Identification: Ã¯ÃÃIIÃ3GÃÃExÃecÃnCÃIICÃT4ÃGc Certificate: Sira 17ATEX4293X IECEx Identification: ExÃecÃnCÃIICÃT4ÃGc Certificate: IECEx SIR 17.0078X CE Identification: CE-compliant
Standards and regulations	Air clearances and creepage distances between the power circuits Standards/regulations: ENÃ60947-1, ENÃ60079-0, ENÃ60079-15
Mounting	Mounting type: Plug-in mounting Assembly instructions: See derating curve Mounting position: vertical or horizontal Connection method: Pluggable onto VIP base module