Industrial Automation
Product properties | IEC test classification: I / II T1 / T2 EN type: T1 / T2 IEC power supply system: TN-C Type: DIN rail module, two-section, divisible Product type: Arrester combination Product family: VALVETRAB MS Number of positions: 3 Surge protection fault message: Optical, remote indicator contact Insulation characteristics Overvoltage category: III Pollution degree: 2 |
Electrical properties | Nominal frequency fN: 50 Hz (60Hz) Indicator/remote signaling Connection name: Remote fault indicator contact Switching function: Changeover contact Operating voltage: 5 VAC ... 250 VAC 30 VDC Operating current: 5 mA AC ... 1.5 A AC 1 ADC |
Connection data | Connection method: Screw connection Fork-type cable lug Screw thread: M5 Tightening torque: 3 Nm (1.5mm² ... 16mm²) 4.5 Nm (25mm²...35mm²) Stripping length: 16 mm Conductor cross section flexible: 1.5 mm² ... 25 mm² 1.5 mm² ... 16 mm² Conductor cross section rigid: 1.5 mm² ... 35 mm² Conductor cross section AWG: 15 ... 2 Remote fault indicator contact Connection method: Plug-in/screw connection via COMBICON Screw thread: M2 Tightening torque: 0.25 Nm Stripping length: 7 mm Conductor cross section flexible: 0.14 mm² ... 1.5 mm² Conductor cross section rigid: 0.14 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/75f79b4b3d7b05479caccfaec392c2a8/-S204x204-FJPG Width: 53.4 mm Height: 98.7 mm Depth: 77.5 mm (incl. DIN rail 7.5mm) Horizontal pitch: 3 Div. |
Material specifications | Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6/PBT Material group: I Housing material: PA 6.6 PBT |
Mechanical properties | Mechanical data Open side panel: No |
Protective circuit | Mode of protection: L-PEN Direction of action: 3L-PEN Nominal voltage UN: 240/415VAC (TN-C) Nominal frequency fN: 50 Hz (60Hz) Maximum continuous voltage UC: 335 VAC Rated load current IL: 80 A Residual current IPE: ⤠2400 µA Standby power consumption PC: ⤠810 mVA Nominal discharge current In (8/20) µs: 12.5 kA Maximum discharge current Imax (8/20) µs: 50 kA Impulse discharge current (10/350)µs, charge: 6.25 As Impulse discharge current (10/350)µs, specific energy: 39 kJ/é Impulse discharge current (10/350)µs, peak value limp: 12.5 kA Total discharge current Itotal (8/20)µs: 150 kA Total discharge current Itotal (10/350)µs: 37.5 kA Short-circuit current rating ISCCR: 25 kA Voltage protection level Up: ⤠1.2 kV ⤠1.6 kV (30 kA - 8/20 µs) Residual voltage Ures: ⤠1.2 kV (at In) ⤠1.1 kV (at 10 kA) ⤠1 kV (at 5 kA) ⤠0.9 kV (at 3kA) TOV behavior at UT: 415 VAC (5s / withstand mode) 457 VAC (120min / safe failure mode) Response time tA: ⤠25 ns Max. backup fuse with V-type through wiring: 80 A (gG - 16 mm²) Max. backup fuse with branch wiring: 160 A (gG) Additional technical data Maximum discharge current Imax (8/20) µs: 65 kA |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 (only when all terminal points are used) Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: ⤠2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation): 7.5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
Approvals | UL specifications Maximum continuous operating voltage MCOV (L-L): 335 VAC Maximum continuous operating voltage MCOV (L-G): 335 VAC Nominal discharge current In (L-L): 20 kA Nominal discharge current In (L-G): 20 kA Mode of protection: L-L L-G Nominal voltage: 240VAC Power distribution system: Delta Nominal frequency: 50/60 Hz Measured limiting voltage MLV (L-L): 3570 V Measured limiting voltage MLV (L-G): 2630 V SPD Type: 4CA UL indicator/remote signaling Operating voltage: 125 VAC AC operating current: 1 A AC UL connection data Tightening torque: 30 lbf-in. Conductor cross section AWG: 14 ... 2 |
Standards and regulations | Standards/specifications: IEC 61643-11 EN61643-11 Note: 2011 2012 |
Mounting | Mounting type: DIN rail: 35 mm |
ECLASS | ECLASS-11.0: 27130802 ECLASS-13.0: 27171201 |
ETIM | ETIM 9.0: EC000381 |
UNSPSC | UNSPSC 21.0: 39121600 |
Description other products