2862149 PHOENIX CONTACT - Technology Bsa

IB IL AI 2-HART-PAC - Analog module

Inline, Analog input terminal, Analog inputs: 2, 4 mA ... 20 mA, 0 mA ... 25 mA, connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, HART functionality, HART protocol transmission, degree of protection: IP20, including Inline connectors and marking fields

Product Code: 2862149

Partner cod.: 2862149

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/8f49d2b498684640a945b59e148b2698/-S204x204-FJPG Width: 48.8 mm Height: 135 mm Depth: 71.5 mm
Interfaces	Inline local bus Number of interfaces: 2 Connection method: Inline data jumper Transmission speed: 500 kbps Transmission physics: Copper
System properties	Module ID code (dec.): 220 ID code (hex): DC Length code (hex): 02 Length code (dec): 02 Process data channel: 32 bit Input address area: 4 Byte Output address area: 4 Byte Register length: 64 bit Required parameter data: 9 Byte Required configuration data: 5 Byte
Input data	Analog Input name: Analog inputs Description of the input: Differential inputs, current Number of inputs: 2 A/D conversion time: approx. 10 Ãµs (bus-synchronous) A/D converter resolution: 16 bit Connection method: Inline shield connector Connection technology: 2-conductor Note regarding the connection technology: shielded Current input signal: 4 mA ... 20 mA 0 mA ... 25 mA Input resistance current input: 250 Ã© Data formats: IBÃIL, standardized representation, PIO Limit frequency (3 dB): 25 Hz Common mode voltage range signal - ground: 40 V (Between current input and functional ground) Measuring principle: Successive approximation Measured value resolution: 16 bits (15 bits + sign bit) Measured value representation: 16 bit two's complement Protective circuit: Surge protection; Suppressor diode
Product properties	Type: modular Product type: I/O component Product family: Inline Scope of delivery: including Inline connectors and marking fields Operating mode: Process data operation with 2 words, PCP with 2 words Diagnostics messages: Failure of the internal I/O supply yes I/O error Error message in the process data User error Error message in the process data Insulation characteristics Overvoltage category: II (IEC 60664-1, ENÃ60664-1) Pollution degree: 2 (IEC 60664-1, ENÃ60664-1)
Electrical properties	Potentials Power consumption: typ. 1.9 W Potentials: Communications power (U Supply voltage: 7.5 VÃDC (via voltage jumper) Current draw: max. 110 mA typ. 95 mA Potentials: Supply of analog modules (U Supply voltage: 24 VÃDC (via voltage jumper) Supply voltage range: 19.2 VÃDC ... 30 VÃDC (including all tolerances, including ripple) Current draw: max. 150 mA typ. 50 mA Electrical isolation/isolation of the voltage ranges Test voltage: 7.5 V supply (bus logic), 24 V supply U_ANA / I/O: 500 VÃAC, 50 Hz, 1 min. Test voltage: 7.5ÃV supply (bus logic), 24ÃV supply U_ANA/ functional ground: 500 VÃAC, 50 Hz, 1 min. Test voltage: I/O/functional ground: 500 VÃAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: Inline connector Conductor connection Connection method: Spring-cage connection Conductor cross section rigid: 0.08 mm² ... 1.5 mm² Conductor cross section flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm Inline connector Connection method: Spring-cage connection Conductor cross section, rigid: 0.08 mm² ... 1.5 mm² Conductor cross section, flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 55°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing)
Standards and regulations	Protection class: III (IEC 61140, ENÃ61140, VDEÃ0140-1)
Mounting	Mounting type: DIN rail mounting