2862961 PHOENIX CONTACT - Technology Bsa

IB IL 24 DO 16-PAC/SN - Digital module

Inline, Digital output terminal, Digital outputs:16, 24 VDC, 500 mA, connection technology:3-conductor, transmission speed in the local bus:500 kbps, degree of protection: IP20, including Inline connectors and marking fields, connectors numbered individually

Product Code: 2862961

Partner cod.: 2862961

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/61847ea072ac2f4a94bf2299909bd975/-S204x204-FJPG Width: 48.8 mm Height: 140.5 mm Depth: 71.5 mm Note on dimensions: Housing dimensions
Notes	Utilization restriction CCCex note: Use in potentially explosive areas is not permitted in China.
Interfaces	Inline local bus Number of interfaces: 2 Connection method: Inline data jumper Transmission speed: 500 kbps
System properties	Module ID code (dec.): 189 ID code (hex): BD Length code (hex): 01 Length code (dec): 01 Process data channel: 16 bit Input address area: 0 Byte Output address area: 2 Byte Register length: 16 bit Required parameter data: 4 Byte Required configuration data: 4 Byte
Output data	Digital Output name: Digital outputs Connection method: Spring-cage connection Connection technology: 3-conductor Number of outputs: 16 Protective circuit: Overload protection, short-circuit protection of outputs; electronic Output voltage: 24 VÃDC (U_S - 1 V) Limitation of the voltage induced on circuit interruption: -46 V ... -15 V Maximum inrush current: max. 1.5 A (at nominal lamp load for 20Ãms) Output current: max. 500 mA (per channel) max. 8 A (Device) Nominal output voltage: 24 VÃDC Output voltage when switched off: max. 2 V Output current when switched off: max. 300 ÃµA Nominal load, inductive: 12 W (1.2 H, 48 Ã©) Nominal load, lamp: 12 W Nominal load, ohmic: 12 VA (48ÃÃ©) Maximum operating frequency with ohmic nominal load: max. 300 Hz (this switching frequency is limited by the number of bus devices, the structure of the bus, the software used and the control or computer system used) Reverse voltage resistance to short pulses: Reverse voltage proof Behavior with overload: Auto restart Behavior with inductive overload: Output can be destroyed Behavior at voltage switch-off: The output follows the power supply without delay Overcurrent shut-down: min. 0.7 A Output current with ground connection interrupt when switched off: max. 25 mA
Product properties	Type: modular Product type: I/O component Product family: Inline Scope of delivery: including Inline connectors and marking fields, connectors numbered individually No. of channels: 16 Operating mode: Process data mode with one word Diagnostics messages: Short-circuit or overload of the digital outputs Error message in the diagnostic code (bus) and display (2 Hz) via the LED (D) on the module Insulation characteristics Overvoltage category: II (IEC 60664-1, ENÃ60664-1) Pollution degree: 2 (IEC 60664-1, ENÃ60664-1)
Electrical properties	No. of channels: 16 Potentials: Communications power (U Supply voltage: 7.5 VÃDC (via voltage jumper) Current draw: max. 90 mA Power consumption: max. 0.675 W Potentials: Segment circuit supply (U Supply voltage: 24 VÃDC (via voltage jumper) Supply voltage range: 19.2 VÃDC ... 30 VÃDC (including all tolerances, including ripple) Current draw: max. 8 A Electrical isolation/isolation of the voltage ranges Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O): 500 VÃAC, 50 Hz, 1 min. Test voltage: 24ÃV supply (I/O) / functional ground: 500 VÃAC, 50 Hz, 1 min. Test voltage: 7.5ÃV supply (bus logic)/functional ground: 500 VÃAC, 50 Hz, 1 min.
Connection data	Connection technology Connection name: Inline connector Conductor connection Connection method: Spring-cage connection Conductor cross section rigid: 0.08 mm² ... 1.5 mm² Conductor cross section flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm Inline connector Connection method: Spring-cage connection Conductor cross section, rigid: 0.08 mm² ... 1.5 mm² Conductor cross section, flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 55°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing)
Standards and regulations	Protection class: III (IEC 61140, ENÃ61140, VDEÃ0140-1)
Mounting	Mounting type: DIN rail mounting