2882776 PHOENIX CONTACT - Technology Bsa

Tecnichal data

Product properties	IEC test classification: II T2 EN type: T2 IEC power supply system: TN-C Type: DIN rail module, two-section, divisible Product type: Surge arrester Product family: SEC Family Number of positions: 3 Surge protection fault message: Optical, remote indicator contact Insulation characteristics Overvoltage category: III Pollution degree: 2
Electrical properties	Nominal frequency f_N: 50 Hz (60Hz) Indicator/remote signaling Connection name: Remote fault indicator contact Switching function: Changeover contact Operating voltage: 250 VAC 250 VDC Operating current: 1 mA AC ... 2 A AC 1 mA DC ... 50 mA DC
Connection data	Connection protective circuit Connection method: Screw connection Tightening torque: 3.5 Nm Stripping length: 14 mm Conductor cross section flexible: 4 mm² ... 25 mm² Conductor cross section rigid: 4 mm² ... 35 mm² Conductor cross section AWG: 18 ... 2 Protective ground connection Connection method: Screw connection Screw thread: M5 Tightening torque: 4.5 Nm Stripping length: 16 mm Conductor cross section flexible: 2.5 mm² ... 16 mm² Conductor cross section rigid: 2.5 mm² ... 25 mm² Conductor cross section AWG: 12 ... 4 Remote fault indicator contact Connection method: Pluggable screw connection Screw thread: M2 Tightening torque: 0.25 Nm Stripping length: 7 mm Conductor cross section flexible: 0.14 mm² ... 1.5 mm² Conductor cross section rigid: 0.14 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/0d6d8e208523ec44bc8169bdf670d517/-S204x204-FJPG Width: 114 mm Height: 101 mm Depth: 76 mm Horizontal pitch: 6.5 Div.
Material specifications	Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PBT-FR Material group: I Housing material: PBT-FR
Protective circuit	Mode of protection: L-PEN Direction of action: 3L-N/PE Nominal voltage U_N: 240/415VAC (TN-C) Nominal frequency f_N: 50 Hz (60Hz) Maximum continuous voltage U_C: 350 VAC Nominal discharge current I_n (8/20) µs: 15 kA Maximum discharge current I_max (8/20) µs: 30 kA Short-circuit current rating I_SCCR: 25 kA Voltage protection level U_p: Ã¢¤ 2.5 kV Residual voltage U_res: Ã¢¤ 2.3 kV (at I_n) Ã¢¤ 1.6 kV (at 10 kA) Ã¢¤ 1.3 kV (at 5 kA) Ã¢¤ 1 kV (at 3kA) TOV behavior at U_T: 415 VAC (5s / withstand mode) 457 VAC (120min / safe failure mode) Response time t_A: Ã¢¤ 25 ns Max. backup fuse with V-type through wiring: 40 A (gG)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: Ã¢¤ 2000 m (amsl) Permissible humidity (operation): 5 % ... 95 %
Standards and regulations	Standards/specifications: IEC 61643-11 EN61643-11 IEC 60364-4-443 IEC 60364-5-534 Note: 2011 2012
Mounting	Mounting type: DIN rail: 35 mm

Technical Specs

ECLASS	ECLASS-11.0: 27130805 ECLASS-13.0: 27171202
ETIM	ETIM 9.0: EC000941
UNSPSC	UNSPSC 21.0: 39121600

Description

Combination of type 2 surge protection and arrester backup fuse, with monitoring of arrester and arrester backup fuse, in combination with a status indicator and remote indication contact. Design: 4-conductor system (L1, L2, L3, PEN), mounting on NS 35 DIN rail

Download

PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00337.pdf

Flyer_00001.pdf

Flyer_00002.pdf

Manufacturer_declaration_00533.pdf

Manufacturer_declaration_15405.pdf

Package_slip_00453.pdf

Product_information_00033.pdf

Product_information_00505.pdf

Technical_drawing_39152.pdf