Not available 
| Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area Utilization restrictionĂ¢€‹ CCCex note: Use in potentially explosive areas is not permitted in China. |
| Product properties | Product type: Media converter MTTF: 1400 Years (SN29500 standard, temperature25°C, operating cycle21%) 599 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 101 Years (SN29500 standard, temperature40°C, operating cycle100%) MTBF: 284 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) 74 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day)) Signal delay: ± 1.3 µs (Store and Forward mode, 10/100 Mbps, depending on the frame size) |
| System properties | Functionality Basic functions: Store-and-forward media converter |
| Electrical properties | Electrical isolation: according to IEEE 802.3 VCC // FE // Ethernet Maximum power dissipation for nominal condition: 2.4 W Test voltage data interface/power supply: 0.5 kVrms (50Hz, 1min.) Supply Supply voltage range: 18 VDC ... 30 VDC (Screw connection) 18 VDC ... 30 VDC (as an alternative or redundant, via backplane bus contact and system current supply) Typical current consumption: < 100 mA (24VDC) Protective circuit: Reverse polarity protection |
| Connection data | Supply Connection method: Plug-in screw terminal block (COMBICON), redundancy possible Single conductor/terminal point, rigid: 0.2 mm² ... 2.5 mm² Single-wire/terminal point, flexible: 0.2 mm² ... 2.5 mm² Conductor cross section, flexible [AWG]: 24 ... 14 Tightening torque: 0.56 Nm ... 0.79 Nm |
| Interfaces | Signal: Ethernet Basic functions: Store-and-forward media converter Data: optical FO Transmit capacity, minimum: Ă¢‰¥ -15 dBm ((9/125µm) dynamic in link mode (average)) Transmit capacity, maximum: Ă¢‰¤ -8 dBm ((9/125µm) dynamic in link mode (average)) Transmission length incl. 3 dB system reserve: 36 km (F-E 9/125 0.36dB/km) 32 km (F-E 9/125 0.4dB/km) 26 km (F-E 9/125 0.5dB/km) Connection method: SC duplex Wavelength: 1300 nm Minimum receiver sensitivity: -31 dBm (dynamic in link mode (average)) Maximum receiver sensitivity: -7 dBm (dynamic in link mode (average)) Transmission medium: Single-mode fiberglass Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3 Transmission speed: 10/100 Mbps Connection method: RJ45 jack, shielded No. of channels: 1 Transmission length: 100 m (shielded twisted pair) Transmission medium: Copper Signal LEDs: Activity, link status, 10/100 Mbps Auto-negotiation modes: Auto Link through: Link fault pass through MDI-/MDI-X switchover: Auto-MDI(X) |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/a676a27eef491e4597eb4a01cc11921e/-S204x204-FJPG Width: 22.5 mm Height: 99 mm Depth: 114.5 mm |
| Material specifications | Material: PA 6.6-FR |
| Cable/line | FO cable Fiber types: 50/125 µm 62.5/125 µm Fiberglass |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 65°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: Ă¢‰¤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) Ă¢‰¤ 2000 m (in acc. with UL) Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) |
| Approvals | CE Certificate: CE-compliant EAC Identification: EAC ATEX Identification: ĂÂŻÂÂ II 3 G Ex nA IIC T4 Gc X Note: Please follow the special installation instructions in the documentation! UL, USA/Canada Identification: 508 Listed Class I, Zone 2, AEx nA IIC T4 Class I, Zone 2, Ex nA IIC T4 Gc X Class I, Div. 2, Groups A, B, C, D Corrosive gas test Identification: ISA-S71.04-1985 G3 Harsh Group A Shipbuilding Identification: DNV GL DNV GL data Temperature: B Humidity: A Vibration: A EMC: B Enclosure: Required protection according to the Rules shall be provided upon installation on board |
| EMC data | Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeĂ¢€‹ Contact discharge: ± 6 kV (Test Level 3) Discharge in air: ± 8 kV (Test Level 3) Indirect discharge: ± 6 kV Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldĂ¢€‹ Frequency range: 80 MHz ... 3 GHz (Test Level 3) Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)Ă¢€‹ Input: ± 2 kV (Test Level 3) Signal: ± 2 kV (Test Level 3) Comments: Criterion B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)Ă¢€‹ Input: ± 0.5 kV (DC supply) Signal: ± 1 kV (Data line, asymmetrical) Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceĂ¢€‹ Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V Emitted interference Standards/regulations: EN55032 Comments: Class A, industrial applications Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. |
| Standards and regulations | Free from substances that could impair the application of coating: in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0 Electrical isolation: according to IEEE 802.3 |
| Mounting | Mounting type: DIN rail mounting |
| ECLASS | ECLASS-11.0: 19170411 ECLASS-12.0: 19170411 ECLASS-13.0: 19170411 |
| ETIM | ETIM 9.0: EC001467 |
| UNSPSC | UNSPSC 21.0: 43201500 |
Description other products
