2910333 PHOENIX CONTACT - Technology Bsa

VAL-US-48/40-P - Type 2 surge protection plug

UL Recognized type 2 SPD and IEC type 2 surge protection plug with a varistor and thermal disconnect for use with VAL-US base elements, mechanical and visual fault warning

Product Code: 2910333

Partner cod.: 2910333

PHOENIX CONTACT

Notes	General: Used in:
Product properties	IEC test classification: II T2 EN type: T2 IEC power supply system: DC Type: Male Product type: Replacement plug Product family: VALVETRAB MS Number of positions: 1 Surge protection fault message: optical Insulation characteristics Overvoltage category: III Pollution degree: 2
Electrical properties	Nominal frequency f_N: 50 Hz (60Hz)
Connection data	Connection method: VALVETRAB plug-in system
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/3e02d9b64ee0a341a2e312513f1ad825/-S204x204-FJPG Width: 17.5 mm Height: 52.4 mm Depth: 55.3 mm Horizontal pitch: 1 Div.
Material specifications	Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PA 6.6/PBT Material group: I Housing material: PA 6.6 PBT
Protective circuit	Mode of protection: L-N L-PEN N-PE Direction of action: 1L-N/PE Nominal voltage U_N: 60 VDC ±10% -48 VDC ±10% (RRH) Nominal frequency f_N: 50 Hz (60Hz) Maximum continuous voltage U_C: 100 VDC Residual current I_PE: Ã¢¤ 450 µA Standby power consumption P_C: Ã¢¤ 35 mVA Nominal discharge current I_n (8/20) µs: 15 kA Maximum discharge current I_max (8/20) µs: 40 kA Short-circuit current rating I_SCCR: 25 kA Voltage protection level U_p: Ã¢¤ 0.55 kV Residual voltage U_res: Ã¢¤ 0.55 kV (at I_n) Ã¢¤ 0.425 kV (at 10 kA) Ã¢¤ 0.325 kV (at 5 kA) Ã¢¤ 0.275 kV (at 3kA) TOV behavior at U_T: 100 VAC (5s / withstand mode) Max. backup fuse with branch wiring: 100 A (gG) Additional technical data Maximum discharge current I_max (8/20) µs: 40 kA
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 80°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: Ã¢¤ 2000 m (amsl) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation): 5g (10 ... 500 Hz / 2.5 h / X, Y, Z)
Approvals	UL specifications Maximum continuous operating voltage MCOV: 100 VDC UL type: type 4 Nominal discharge current I_n: 20 kA Maximum Surge Current per Phase: 40 kA Mode of protection: L-N L-G N-G Nominal voltage: 60 VDC Power distribution system: Single phase Measured limiting voltage MLV: 720 V SPD Type: 4CA
Standards and regulations	Air clearances and creepage distances Standards/regulations: EN60664-1 / EN61643-11 Standards/specifications: IEC 61643-11 EN61643-11 Note: 2011 2012
Mounting	Mounting type: on base element